Product Data sheet for Cellular Sensors Ammonia Gas Sensor with 3G Connectivity SIAQ-3G-NH3 SKU: SIAQ-3G-NH3 Doc No: SIAQ-3G-NH3-DS-EN-10 Introduction SIAQ-3G-NH3 is an electrochemical-type gas sensor which has high sensitivity to low concentrations of ammonia gas, high selectivity, and a stable baseline. With modular design, it allows user to replace the measurement module easily when the sensor life reached the limit. The device has built-in IoT gateway with 3G cellular connectivity allow to connect easily to any IoT platform. The measurement sensor is from Japan to deliver the highest performance and accuracy. High selectivity to NH3; Small influence by H2S; Excellent Durability to NH3 exposure; Sensor life > 2 years; Stable base-line; 3G Connectivity; Ready to connect to Globiots platform; Plug & Play. Typical Applications Monitor leakage of Ammonia gas for Refrigerator; NH3 Monitoring; NH3 Detector. Specification SENSOR SPECIFICATION NH3 sensor electrochemical-type gas sensor Measuring range for NH3 0..100 ppm Max detecting concentration 200 ppm Repeatability < 10% of Reading value Resolution 1 ppm Stability / month < 2% of Reading value Zero stability +/- 2 ppm Working atmospheric pressure 101.3 Kpa +/- 10% Sensor life > 2 years Humidity and Temperature sensor Digital type, factory calibrated Humidity measuring range & accuracy 0 .. 100 %RH, +/- 2.0% Humidity resolution 0.1% Temperature measuring range & accuracy -40 .. + 85 oC, +/- 0.2 oC Temperature resolution 0.1 oC Working temperature -30 .. + 50 oC Working humidity 15 .. 90% RH Sensor Filter 316SS sintered filter Sensor housing material / Rating SS316/SS304 / for Indoor use CONNECTIVITY SPECIFICATION Cellular 3G-Dual band (2100/900) Host communication supports TCP/IP, UDP/IP, FTP, HTTPS, SNMP... Vietnam Type Approval Certification QCVN 54:2011/BTTTT, QCVN 15:2015/BTTTT (DAVITEQ B00122019) Power supply 7..48VDC, avg. 200mA, peak 1.5A Back-up battery Lithium Super Capacitor On-board memory & sensors 2MB Flash, PCB temperature sensor Electrical connectors M12, 4-pin, coding A or 9mm Power Plug and USB port SIM slot 01 x micro-SIM (cellular versions only) Included accessories mounting bracket for wall mount (cellular version only) Operating Temperature/Humidity -20 .. + 60 degC / 95%RH, non-condensing Housing/Protection Aluminum+Polycarbonate / IP67 Dimension H180xW73xD42 Net weight <400 grams Ordering Code Item code Descriptions SIAQ-3G-NH3 INDOOR AIR QUALITY MONITORING, 3G DUAL BAND CONNECTIVITY, WITHOUT DISPLAY, 7-48VDC SUPPLY, 9MM DC POWER JACK AND 220VAC POWER ADAPTER, NH3-TEMPERATURE-HUMIDITY Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Compact Particulate PM10 Monitor CPM10 SKU: CPM10 Doc No: CPM10-DS-EN-10 Introduction CPM10 is a compact Dust monitor to help measuring particulate matter PM10 in realtime. Data will be sent back to cloudGlobiots for storage or forwarding to 3rd-party software / platform. The device is designed for outdoor applications. The sampling air will be controlled by temperature and humidity to have the highest accuracy and longest life of operation. It is fully automatic air sampling, automatic cleaning and zeroing allow the package can run continuously in 02 years without maintenance. Robust design for outdoor application; Temperature & Humidity control; Automatic cleaning; Automatic zeroing; Automatic alert when unit need maintenance; Cellular connectivity to server; Remote management, data storage and data forwarding via cloud portal; Typical Applications Dust Monitor for Environment Monitor in City, Urban areas; Dust Monitor used by Environmental consultants, EHS managers, Researchers, etc. who want to collect accurate, scientifically robust data without the cost of a reference PM monitor Specification SENSOR SPECIFICATION Particulate Matter measurement PM10 Measuring range 0..3000 ug/m3 Linearity 15% of reading Repeatability 1 ug/m3 Resolution 0.1 ug/m3 Working atmospheric pressure 101.3 Kpa +/- 10% Humidity and Temperature measurement Digital type, factory calibrated Humidity measuring range & accuracy 0 .. 100 %RH, +/- 1.5% Humidity resolution 0.1% Temperature measuring range & accuracy -40 .. + 85 oC, +/- 0.1 oC Temperature resolution 0.1 oC Radiation shield for Humidity & Temperature sensor Yes Working temperature -10 .. + 60 oC Working humidity 15 .. 90% RH CONNECTIVITY SPECIFICATION Cellular 3G-Dual band (2100/900) Host communication supports TCP/IP, UDP/IP, FTP, HTTPS, SNMP... Vietnam Type Approval Certification QCVN 54:2011/BTTTT, QCVN 15:2015/BTTTT (DAVITEQ B00122019) Antenna Internal antenna Power supply 7..48VDC, avg. 200mA, peak 1.5A Back-up battery Lithium Super Capacitor On-board memory & sensors 2MB Flash, PCB temperature sensor Electrical connectors PG13.5 cable gland of M20x1.5 female thread conduit SIM slot 01 x micro-SIM (cellular versions only) Housing/Protection Aluminum + UV rated plastic / IP65 Dimension D200xL600 Net weight < 4 kgs Ordering Code Item code Descriptions CPM10-3G-01 COMPACT PARTICULATE PM10 MONITOR, 3G DUAL BAND CONNECTIVITY, WITHOUT DISPLAY, 7-48VDC SUPPLY, INCLUDED TEMPERATURE & HUMIDITY MEASUREMENT Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Occupancy Detecting Sensor ODS SKU: ODS Doc No: ODS-DS-EN-10 Introduction ODS is the 60 GHz mmWave sensor to solve the existing disadvantages of current technologies like PIR sensor, Camera…ODS is the smart sensor to detect the human in specified area.  It works perfectly for restroom occupancy and management for maintenance. Leveraging our sensor technology, the Internet of Things, cloud platforms, and big data applications, this sensor provides people with better, more efficient, convenient and comfortable services. The built-in connectivity can support various type of communication like Sub-GHz, LoRaWAN, Sigfox, Wifi, Ethernet, Cellular (3G, NB-IoT) Robust design for outdoor application; Temperature & Humidity control; Automatic cleaning; Automatic zeroing; Automatic alert when unit need maintenance; Cellular connectivity to server; Remote management, data storage and data forwarding via cloud portal; Typical Applications ODS is used for Occupancy detection, People tracking, People counting, Space Utilization, Maintenance alerts, Equipment management, Energy consumption management… in: Restrooms Office Buildings Hospitals Shopping Malls Mass Transit Airports Tourist Attractions Hotels Schools Specification OCCUPANCY SENSOR SPECIFICATION Operating frequency 60GHz Azimuth angle 120 degree Elevation angle 120 degree Detection range 6m CO2 SENSOR SPECIFICATION CO2 Sensor technology NDIR sensor CO2 range/resolution/accuracy 400-10.000 ppm / 1ppm / (+/- 30ppm + 3% reading) Repeatability +/- 10ppm Temperature Stability +/- 2.5ppm / oC in range 0-50 oC Temperature range/resolution/accuracy -40..+70oC / 0.1oC / ± 0.5 °C in range 0-50 oC Humidity range/resolution/accuracy 0-100%RH / 0.1%RH /+/- 3.0%RH in range 25-100% RH SOUND LEVEL SENSOR Range 30 - 130 dB Frequency Response 31.5 Hz - 8 KHz Accuracy +/- 3 dB PM SENSOR SPECIFICATION Mass concentration PM1.0, PM2.5, PM4 and PM10 Number concentration PM0.5, PM1.0, PM2.5, PM4 and PM10 Mass concentration range 1 to 1000 μg/m3 Mass concentration resolution 1 μg/m3 Mass concentration accuracy ±10 μg/m3 @ 0 to 100 μg/m3, ±10 % @ 100 to 1000 μg/m3 Lower limit of detection 0.3 μm Number concentration range 0 to 3’000 #/cm3 Number concentration precision 1,2 for PM0.5, PM1 and PM2.53 0 to 1000 #/cm3 ==> ±100 #/cm3 1000 to 3000 #/cm3 ==> ±10 % m.v. CONNECTIVITY SPECIFICATION Connectivity Select one of WiFi, Ethernet, Sub-GHz, LoRaWAN, Sigfox Host communication supports TCP/IP, UDP/IP, FTP, HTTPS, SNMP... Antenna Internal antenna Power supply 7..48VDC, avg. 200mA, peak 1.5A On-board memory & sensors 2MB Flash, PCB temperature sensor Electrical connectors PG13.5 cable gland of M20x1.5 female thread conduit SIM slot (cellular versions) 01 x micro-SIM (cellular versions only) Working temperature -20 .. + 60 oC Working humidity 0 .. 95% RH Dimension 150x150x60 (without mounting bracket) Net weight < 1 kg Ordering Code Item code Descriptions ODS-WF-01 OCCUPANCY DETECTING SENSOR WITH WIFI CONNECTION, 7-48VDC SUPPLY, WITH MOUNTING BRACKET ODS-ETH-01 OCCUPANCY DETECTING SENSOR WITH ETHERNET CONNECTION, 7-48VDC SUPPLY, WITH MOUNTING BRACKET ODS-3G-01 OCCUPANCY DETECTING SENSOR WITH 3G CONNECTION, 7-48VDC SUPPLY, WITH MOUNTING BRACKET ODS-LRW-01 OCCUPANCY DETECTING SENSOR WITH WIRELESS LORAWAN CONNECTIVITY, INTERNAL ANTENNA, 860-930 MHZ FOR ALL REGIONS, 7-48VDC SUPPLY, WITH MOUNTING BRACKET ODS-SFC-01 OCCUPANCY DETECTING SENSOR WITH WIRELESS SIGFOX CONNECTIVITY, INTERNAL ANTENNA, 860-930 MHZ FOR ALL REGIONS, 7-48VDC SUPPLY, WITH MOUNTING BRACKET OPTIONAL SENSORS -CO2 CO2 SENSOR FOR RANGE UP TO 40.000 PPM, INCLUDED HUMIDITY AND TEMPERATURE MEASUREMENT -SND SOUND LEVEL SENSOR -PM PARTICLE SENSOR PM1.0, PM2.5, PM10 FOR RANGE UP TO 1000 UG/M3 other sensors Please consult factory Link for full datasheet: https://filerun.daviteq.com/wl/?id=TEgG7hsjYvBQ4HIPu9jxFIYldgOuTlAw Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com NB-IoT Impact Rain Sensor WSNB-IRS SKU: WSNB-IRS Doc No: WSNB-IRS-DS-EN-10 Introduction NB-IoT impact rain sensor WSNB-IRS is a new rain sensor technology. Unlike the traditional methods such as weighing or tipping bucket range gauge, this impact rain sensor has many unique advantages as no maintenance is required, providing real-time information on rain intensity, duration, and accumulated rainfall. It also can distinguish between rain and hail and provide data for both types of precipitation. The measurement principle is using an impact sensor located beneath the stainless steel cover to count every drop of rain. Raindrops hit the surface at their terminal velocity, which is a function of the raindrop diameter. Measurement is based on the acoustic detection of each raindrop as it impacts the sensor cover. Heavier drops create a more significant acoustic signal than smaller drops. Ultra-low-power design and smart firmware allow the complete Wireless and Sensor package to run on AA batteries for up to 10 years. It supports LTE Cat NB1 connectivity for global bands. This NB-IoT Impact Rain Sensor WSNB-IRS is very suitable for remote area locations with a maintenance-free design and long battery life. Rain measurement for stationary or mobile in city, rural areas... Highlighted Features Compact & Light weight; Maintenance-free; Not affected by falling leaves, bird dropping; 5-10 years battery life; Distinguish between rain and hail; Report Rain intensity, precipitation and duration; IP67 Robust design for outdoor application; LTE Cat NB1 connectivity for Global bands. Specification SENSOR SPECIFICATION Rain measurement Intensity, Precipitation and Duration Measuring range 0..200 mm/h Resolution 0.1 mm/h, 0.1mm Accuracy within +/- 10% of measurement Working atmospheric pressure 101.3 Kpa +/- 20% Working temperature -40 .. + 85 oC Working humidity up to 100% RH COMMUNICATION SPECIFICATION Cellular LTE Cat NB1 Global bands: B1, B2, B3, B4, B5, B8, B9, B10, B12, B13, B17, B18, B19, B20, B25, B26, B27, B28, B66 Data rate Max download rate 27Kbps Max upload rate 65Kbps Host communication supports TCP/IP, UDP/IP, FTP, HTTPS, SNMP... Antenna Internal antenna Battery 04 AA batteries, Type 1.5V or 3.6V Configuration via offline cable with free software and via online Globiots system SIM slot 01 x micro-SIM Accessories Standard mounting bracket Dimensions D140xH45 without bracket Total net weight < 1kg, with bracket and batteries Ordering Code Item code Descriptions WSNB-IRS-01 NB-IOT IMPACT RAIN SENSOR, 0-200MM/H, IP67, AA BATTERIES OPERATED, GLOBAL BANDS Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com NBIoT Ambient Temperature Sensor WSNB-ATE SKU: WSNB-ATE Doc No: WSNB-ATE-DS-EN-10 Introduction WSNB-ATE is an NBIoT sensor using a Digital temperature sensor that delivers highly accurate measurements in the range of -40°C to + 85°C. The device has built-in NBIoT connectivity module to allow it connect to any IoT platform. Digital High-Accuracy Sensor; Global band NBIoT / Cat M1 / GPRS; Plug & Play; Data logging up to 140.000 records; Sending alarm messages for Hi-Lo Temperature; Sending alarm message for Power cut-off (to monitor power supply of machine) Notification when communication drop. Typical Applications Ambient temperature Monitoring for Fridge, Freezer; Ambient temperature Monitoring for Factory / Building; Ambient temperature Monitoring for Warehouse; Ambient temperature Monitoring for Data Center; Ambient temperature Monitoring for HVAC; Specification SENSOR SPECIFICATION Sensor Digital type, factory calibrated Measuring range -40°C .. + 85°C Accuracy +/- 0.5°C Resolution 0.125°C Sensor protection material / Rating PA / IP68 (for version with sensor cable) Cable length 300 or 900mm NBIoT SPECIFICATION Connectivity LTE Cat M1/NB1 with Global band (B1, B2, B3, B4, B5, B8, B9, B10, B12, B13, B17, B18, B19, B20, B25, B26, B27, B28, B66 ) and 2G-Quadband fall back, standard internal antenna, optional external antenna Antenna Internal Antenna, optional external antenna Configuration via offline USB cable (PC software is supplied at free) Power Supply 7..48VDC, avg 200mA, peak 1.5A Back-up battery 200mAh Lithium ion RF Module complies to CE, FCC, ARIB Working temperature -40°C..+85°C Dimensions H140xW73xD42 Net-weight 250 grams Housing Engineering Plastic, IP54 for Indoor Mounting Wall mount bracket Ordering Code Item code Descriptions WSNB-ATE-12-300 NBIoT AMBIENT TEMPERATURE SENSOR, 300MM CABLE TYPE , INTERNAL ANTENNA, 7..48 VDC WSSFC-ATE-12-900 NBIoT AMBIENT TEMPERATURE SENSOR, 900MM CABLE TYPE , INTERNAL ANTENNA, 7..48 VDC Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com