Product data sheet for Sigfox Sensors Sigfox node with DULP input WSSFC-M12F SKU: WSSFC-M12F Doc No: WSSFC-M12F-DS-EN-10 Introduction WSSFC-M12F is the modular design Sigfox wireless sensor, based on 10-year experience in the design and manufacturing of Industrial sensors of Daviteq Company. It can accept the DULP signal from Daviteq DULP output sensors like ATE, ATH, AVS, AFD... With an Ultra-low-power design and smart firmware allow the complete Wireless and Sensor package run on a 2 x AA battery for up to 10 years. It can support all regions of the Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, and RC7. Sigfox Ready; 10-year battery; Plug & Play. Compatible DULP Sensors ATE - Ambient temperature sensor; ATH - Ambient humidity and temperature sensor; PTE - Process temperature sensor; AVS, AFD flow sensor Specification Sensor Input 1 x port DULP (Digital Ultra Low Power Signal) Sensor connector M12-F 4-pin, Coding A Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2dbi Configuration Downlink or via offline USB cable (PC software is supplied at free) Battery 02 x AA Type 1.5VDC, working time up to 10 years (depends on configuration) RF Module complies to CE, FCC, ARIB Working temperature -40oC..+60oC (using Energizer Lithium Ultimate AA battery) Dimensions H106xW73xD42 Net-weight 190 grams Housing Aluminum+Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-M12F-01 SIGFOX NODE WITH DULP INPUT SENSOR, TYPE AA BATTERY 1.5VDC, IP67, M12-F FOR SENSOR CONNECTION Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Piezo-Electric 10KHz Vibration Sensor WSSFC-V1A SKU: WSSFC-V1A Doc No: WSSFC-V1A-DS-EN-10 Introduction WSSFC-V1A is a cost effective, Sigfox accelerometer single-axis vibration sensor designed for condition monitoring and preventive maintenance applications. The piezo-electric accelerometer is available in ranges ±25g or 50g and features a flat frequency response up to >10kHz. Its accelerometer feature a stable piezo-ceramic crystal in shear mode with low power electronics, sealed in a fully hermetic package. The Piezo Electric technology incorporated in the WSSCF-V1A accelerometer has a proven track record for offering the reliable and long-term stable output required for condition monitoring applications. The accelerometer is designed and qualified for machine health monitoring and has superior Resolution, Dynamic Range and Bandwidth to MEMS devices. Beside that it can also measure the temperature at mounting point. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery up to 10 years. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. 10KHz Bandwidth vibration sensor; Sigfox Ready; 10-year battery; Plug & Play. Compatible DULP Sensors Machine Health Monitoring; Predictive Maintenance Installations; Vibration Monitoring; Impact & Shock Monitoring; Bearing monitoring...... Specification SENSOR SPECIFICATION Sensor technology Hermetically Sealed, Piezo-Ceramic Crystal, Shear Mode 8-Parameter Measurement Acceleration RMS & Peak Velocity RMS & Peak Displacement RMS & Peak Frequency & Temperature Acceleration Range ±25 or 50 Shock Limit (g) 10,000 Frequency Response and Resonant Frequency (Hz) 2-10000, >30000 Non-Linearity, Transverse Sensitivity ±2%FSO, < 5% Temperature measuring and operating range, accuracy & resolution (°C) -40.. +85, +/- 0.5, 0.125 Sensor Material, housing protection and mounting 304SUS, IP67, M6 Screw *Notes All above values are typical at +24°C, 80Hz Connector M12-M 5-pin, Coding A Cable 2m cable, wired to Sigfox node SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2 dbi Configuration via offline USB cable (PC software is supplied at free) and via Downlink Battery 02 x AA Type 1.5VDC, working time up to 10 years (depends on configuration)** 7 years working with 30 minutes update, RC4, 1 x transmit RF Module complies to CE, FCC, ARIB Working temperature -40oC..+60oC (using Energizer Lithium Ultimate AA battery) Dimensions H106xW73xD42 Net-weight 190 grams Housing Aluminum+Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-V1A-9-025 SIGFOX PIEZO-ELECTRIC 10KHZ VIBRATION SENSOR, +/- 25G, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-V1A-8-025 SIGFOX PIEZO-ELECTRIC 10KHZ VIBRATION SENSOR, +/- 25G, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES Link for full datasheet: https://filerun.daviteq.com/wl/?id=rf1Rddc6KQo4TjqglUCs4FgZaiTCcII7 Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Air Differential Pressure Sensor WSSFC-APS-D SKU: WSSFC-APS-D Doc No: WSSFC-APS-D-DS-EN-10 Introduction WSSFC-APS-D is a Sigfox Air Differential Pressure Sensor utilizes the advanced Piezo pressure sensor technology from Germany allows high accuracy, stable and ultra-low power consumption. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery up to 10 years. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. German Piezo Technology; Sigfox Ready; 10-year battery; Plug & Play. Typical Applications HVAC - Air Filter Clogging Monitoring; Air Compressor - Air Intake Filter Clogging Monitoring; Air Flow Monitoring; Positive Pressure Clean Room Monitoring; Negative Pressure Clean Room Monitoring; ... Specification SENSOR SPECIFICATION Sensing Technology Advanced CMOS technology from Germany Measuring range & accuracy +/-125 Pa, +/- 500 Pa, +/- 1500 Pa 3% reading Zero accuracy & repeatibility 0.08 Pa, 0.04 Pa Temperature drift & Offset stability < 0.5% reading per 10 oC, < 0.05 Pa/year Measureable Gases AIR, O2, N2 (No condensation) Working temperature -20 .. + 85 oC Wetted parts PBT, glass (silicon nitride, silicon oxide), silicon, gold, FR4, silicone as static sealing, epoxy, copper alloy, lead-free solder Process connection Barb fittings for gas tube 6x4mm SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2 dbi Configuration via offline USB cable (PC software is supplied at free) Battery 02 x AA Type 1.5VDC, working time up to 10 years (depends on configuration) RF Module complies to CE, FCC, ARIB Working temperature -40oC..+60oC (using Energizer Lithium Ultimate AA battery) Dimensions H106xW73xD42 Net-weight 190 grams Housing Aluminum+Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-APS-D-1500-9 SIGFOX AIR DIFFERENTIAL PRESSURE SENSOR, 0-1500 PA, -20 TO +85 OC PROCESS, G1/4"-F PORT WITH BARB FITTING 6X4MM, 304SS, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-APS-D-1500-8 SIGFOX AIR DIFFERENTIAL PRESSURE SENSOR, 0-1500 PA, -20 TO +85 OC PROCESS, G1/4"-F PORT WITH BARB FITTING 6X4MM, 304SS, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES WSSFC-APS-D-500-9 SIGFOX AIR DIFFERENTIAL PRESSURE SENSOR, 0-500 PA, -20 TO +85 OC PROCESS, G1/4"-F PORT WITH BARB FITTING 6X4MM, 304SS, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-APS-D-500-8 SIGFOX AIR DIFFERENTIAL PRESSURE SENSOR, 0-500 PA, -20 TO +85 OC PROCESS, G1/4"-F PORT WITH BARB FITTING 6X4MM, 304SS, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES WSSFC-APS-D-125-9 SIGFOX AIR DIFFERENTIAL PRESSURE SENSOR, 0-125 PA, -20 TO +85 OC PROCESS, G1/4"-F PORT WITH BARB FITTING 6X4MM, 304SS, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-APS-D-125-8 SIGFOX AIR DIFFERENTIAL PRESSURE SENSOR, 0-125 PA, -20 TO +85 OC PROCESS, G1/4"-F PORT WITH BARB FITTING 6X4MM, 304SS, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Air Differential Pressure and Temperature Sensor WSSFC-APS-DT SKU: WSSFC-APS-DT Doc No: WSSFC-APS-DT-DS-EN-10 Introduction WSSFC-APS-DT is a Sigfox Air Differential Pressure & Temperature Sensor utilizes the advanced Piezo pressure sensor technology from Germany allows high accuracy, stable and ultra-low power consumption. Besides pressure measurement, the sensor also comes with a digital air temperature sensor. This special sensor is used to monitor the performance of the Fan Coil Unit of HVAC system. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. German Piezo Technology; Sigfox Ready; Plug & Play. Typical Applications Air Filter Clogging Monitoring for FCU; Monitor temperature of Air outlet of FCU; Air Flow monitoring by Pitot tube; Monitor Positive Pressure & Temperature of Clean Room; Monitor Negative Pressure & Temperature of  Clean Room; ... Specification SENSOR SPECIFICATION Pressure Technology Advanced CMOS technology from Germany Measuring range & accuracy +/-125 KPa, 3% reading Zero accuracy & repeatability 0.08 Pa, 0.04 Pa Temperature drift & Offset stability < 0.5% reading per 10 oC, < 0.05 Pa/year Measurable Gases AIR, O2, N2 (No condensation) Working temperature -20 .. + 85 oC Wetted parts PBT, glass (silicon nitride, silicon oxide), silicon, gold, FR4, silicone as static sealing, epoxy, copper alloy, lead-free solder Process connection Barb fittings for gas tube 6x4mm, come with 2 x 1m 6x4mm PE tube and 2 brass barb fitting G1/4" Temperature Sensor Digital type, factory calibrated, IP67, immersible to ice-water for quick validation Measuring range -35 .. + 70 oC Accuracy & Resolution +/- 0.5oC, 0.125oC Material PA plastic with PVC cable, 500mm length with PG7 cable gland for mounting SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2 dbi Configuration via offline USB cable (PC software is supplied at free) Power supply 9..36VDC, max 300mA, 9mm DC Jack, 220VAC Power adapter EU plug is supplied as standard RF Module complies to CE, FCC, ARIB Dimensions H200xW50xD30 Net-weight 150 grams Housing ABS+Polycarbonate, IP54 Mounting Wall mount bracket by 02 x screw M4 Ordering Code Item code Descriptions WSSFC-APS-DT-125-9 SIGFOX AIR DIFFERENTIAL PRESSURE & TEMPERATURE SENSOR, 0-125 PA, -20 TO +70 oC PROCESS, INTERNAL ANTENNA, 9..36VDC SUPPLY, IP54, RC2-RC3-RC4-RC5 ZONES WSSFC-APS-DT-125-8 SIGFOX AIR DIFFERENTIAL PRESSURE & TEMPERATURE SENSOR, 0-125 PA, -20 TO +70 oC PROCESS, INTERNAL ANTENNA, 9..36VDC SUPPLY, IP54, RC1-RC6-RC7 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Smart Water Meter WSSFC-SHMJ SKU: WSSFC-SHMJ Doc No: WSSFC-SHMJ-DS-EN-10 Introduction WSSFC-SHMJ is the Multi-jet water meter from DN15 to DN50, for Hot/Cold water, equipped with the Sigfox communication module. Its design is modular design, based on 10-year experience in design and manufacturing Industrial sensor of Daviteq Company. It complies to international standard ISO4064. With Ultra-low power design and smart firmware allow the complete meter run on a single CR123 battery up to 10 years. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. Sigfox Ready; 10-year battery; ISO4064 standard; Magnetic shield; Dry dial. Applications Hot / Cold water meter in Building / Facility; Smart water meter for Utility residential; Specification WATER METER SPECIFICATION Meter type Multi jet water meter Dial Dry dial Size DN15, DN20, DN25, DN32, DN40, DN50 Accuracy R80 (standard), R100, R125, R160 Applicable fluids Hot or Cold water Threads end BSP (standard) or NPT Working temperature of water 0.1 .. 40 oC for Cold water and 90oC for Hot water Working pressure of water <= 16 barg Max error +/- 5% for Q1 to Q2, +/- 2% for Q2 to Q3 or Cold water and +/- 3% for Q2 to Q3 for Hot water Body Materials Brass (painted or un-painted) or Plastic (black color) Standard ISO4064 SIGFOX MODULE SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2 dbi Configuration via offline USB cable (PC software is supplied at free) Battery 1 x CR123 Type 3.0VDC, working time up to 10 years (depends on configuration) RF Module complies to CE, FCC, ARIB Working temperature -40oC..+60oC Dimensions H100xW50xD50 Net-weight 100 grams Housing Polycarbonate plastic, IP68 Mounting Integral mounting to meter body or remote mounting with cable (0.5m) Ordering Code Item code Descriptions WSSFC-SHMJ-9-015MCBSP SIGFOX SMART WATER METER, MULTI-JET TYPE, DN15, BRASS BODY, COLD TYPE, BSP THREADS, ISO4064, R80, DRY DIAL, TYPE CR123 BATTERY 3.0VDC, IP68, RC2-RC3-RC4-RC5 ZONES WSSFC-SHMJ-9-020MCBSP SIGFOX SMART WATER METER, MULTI-JET TYPE, DN20, BRASS BODY, COLD TYPE, BSP THREADS, ISO4064, R80, DRY DIAL, TYPE CR123 BATTERY 3.0VDC, IP68, RC2-RC3-RC4-RC5 ZONES WSSFC-SHMJ-9-025MCBSP SIGFOX SMART WATER METER, MULTI-JET TYPE, DN25, BRASS BODY, COLD TYPE, BSP THREADS, ISO4064, R80, DRY DIAL, TYPE CR123 BATTERY 3.0VDC, IP68, RC2-RC3-RC4-RC5 ZONES WSSFC-SHMJ-8-015MCBSP SIGFOX SMART WATER METER, MULTI-JET TYPE, DN15, BRASS BODY, COLD TYPE, BSP THREADS, ISO4064, R80, DRY DIAL, TYPE CR123 BATTERY 3.0VDC, IP68, RC1-RC6-RC7 ZONES WSSFC-SHMJ-8-020MCBSP SIGFOX SMART WATER METER, MULTI-JET TYPE, DN20, BRASS BODY, COLD TYPE, BSP THREADS, ISO4064, R80, DRY DIAL, TYPE CR123 BATTERY 3.0VDC, IP68, RC1-RC6-RC7 ZONES WSSFC-SHMJ-8-025MCBSP SIGFOX SMART WATER METER, MULTI-JET TYPE, DN25, BRASS BODY, COLD TYPE, BSP THREADS, ISO4064, R80, DRY DIAL, TYPE CR123 BATTERY 3.0VDC, IP68, RC1-RC6-RC7 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox AC Current Sensor WSSFC-AC SKU: WSSFC-AC Doc No: WSSFC-AC-DS-EN-10 Introduction WSSFC-AC is a Sigfox sensor with 1-channel AC current input 5A to measure the AC current load of your motors, machines...to count the energy consumption, OVER-load or NO-load detection, run hour counting...With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery up to 10 years. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. Compatible with any 5A Current Transformer on the market ; Sigfox Ready; 10-year battery; Plug & Play. Typical Applications Monitor any electrical loads; Monitor load of Motor, Pump, Fan; Monitoring load of Air-Con, Fridge, Freezer... Specification SENSOR SPECIFICATION Measuring range 0..5A AC Accuracy 1.0% Resolution 10 bit Temperature Drift < 100 ppm Electrical connection cable 0.5m length with wire crimping connectors for SAFETY SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2 dbi Configuration via offline USB cable (PC software is supplied at free) Battery 02 x AA Type 1.5VDC, working time up to 10 years (depends on configuration) RF Module complies to CE, FCC, ARIB Working temperature -40oC..+60oC (using Energizer Lithium Ultimate AA battery) Dimensions H106xW73xD42 Net-weight 190 grams Housing Aluminum+Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-AC-9-11 SIGFOX SENSOR 1-CHANNEL AC CURRENT INPUT MAX 5A, CABLE 0.5M LENGTH WITH  WIRE CRIMPING CONNECTORS FOR SAFETY, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-AC-8-11 SIGFOX SENSOR 1-CHANNEL AC CURRENT INPUT MAX 5A, CABLE 0.5M LENGTH WITH  WIRE CRIMPING CONNECTORS FOR SAFETY, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Toilet Odor Sensor WSSFC-TOS SKU: WSSFC-TOS Doc No: WSSFC-TOS-DS-EN-10 Introduction WSSFC-TOS is a Sigfox sensor with built-in electrochemical gas sensor to measure Ammonia NH3 and H2S gas concentration to measure Toilet odor level. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 1 x AA battery 3.6V for 2-5 years with 15 minutes update. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. High stability Electrochemical sensor ; Sigfox Ready; 2-5 years battery life with 15 minutes update; Plug & Play. Typical Applications Monitor Ammonia and H2S in private or public toilets. Specification SENSOR SPECIFICATION Measuring range for combination of NH3 and H2S 0..50 ppm Max detecting concentration 200 ppm Repeatability < 10% of Reading value Resolution 0.1 ppm Stability / month < 10% of Reading value Zero stability < 1% of full scale Working temperature -20 .. + 50 oC Working humidity 15 .. 90% RH Working atmospheric pressure 101.3 Kpa +/- 10 Kpa Sensor life 2 years SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2 dbi Configuration via offline USB cable (PC software is supplied at free) Battery 01 x AA Type 3.6VDC RF Module complies to CE, FCC, ARIB Working temperature -40oC..+60oC (using Energizer Lithium Ultimate AA battery) Dimensions H106xW73xD42 Net-weight < 100 grams Housing Polycarbonate, IP67 Mounting Wall mount bracket Payload Data The following is the format of payload data will be sent to Sigfox server. Length is 6 bytes, it is future-proof for expansion to 12 bytes. Sensor type (1 byte) Status (1 byte) 1 st - Parameter (4 bytes) 2nd - Parameter (4 bytes) Meaning of Data in the Payload Data Size (byte) Bit Format Meaning Sensor type 1 all Uint8 Sensor type = 0x... means Toilet Odor SensorSensor type = 0xFF means no sensor Status: battery level 1 Bit 7 and 6 Uint8 Battery capacity in 04 levels 11: battery level 4 (99%) 10: battery level 3 (60%) 01: battery level 2 (30%) 00: battery level 1 (10%) Status: error Bit 5 and 4 Node status 01: error 00: no error Status: alarm 1 Bit 3 and 2 Alarm status of 1st - Parameter (Y1 value)11 : Hi alarm 01 : Lo alarm 00 : No alarm Status: alarm 2 Bit 1 and 0 Alarm status of 2nd - Parameter (Y2 value)11 : Hi alarm 01 : Lo alarm 00 : No alarm 1st - Parameter 4 all Float Y1 value: Toilet Odor value in ppm 2nd - parameter 4 all Float Y2 value: spare Ordering Code Item code Descriptions WSSFC-TOS-9-11 SIGFOX TOILET ODOR SENSOR, AMMONIA AND H2S, INTERNAL ANTENNA, TYPE AA BATTERY 3.6VDC, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-TOS-8-11 SIGFOX TOILET ODOR SENSOR, AMMONIA AND H2S, INTERNAL ANTENNA, TYPE AA BATTERY 3.6VDC, IP67, RC1-RC6-RC7 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Soil Moisture Sensor WSSFC-CAPSM SKU: WSSFC-CAPSM Doc No: WSSFC-CAPSM-DS-EN-10 Introduction WSSFC-CAPSM is a Sigfox sensor with built-in cost effective capacitive soil sensor to detect the soil moisture. It can be used for moisture monitoring in Green house, net house, plastic house, horticulture, agriculture... With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 1 x AA battery 3.6V up to 10 years. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. Good stability measurement; Sigfox Ready; 10-year battery; Plug & Play. Typical Applications Soil Moisture monitoring for green house, net house... Soil Moisture monitoring for open field, garden... Soil Moisture monitoring for horticulture... Specification SENSOR SPECIFICATION Sensor connection Integrated or 1m cable via PG9 cable gland Moisture Measuring range 0..100% moisture Moisture Accuracy +/- 5% of moisture Moisture Repeatability < 1% Moisture Resolution 0.1% Ambient Temperature Measurement -40 .. + 60 oC Temperature accuracy +/- 0.5 oC Temperature resolution 0.1 oC Working temperature -40 .. + 60 oC Working humidity 0 .. 100% RH SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Functions Sending data in interval or when alarms occur Antenna Internal Antenna 2 dbi Configuration via offline USB cable (PC software is supplied at free) Battery 01 x AA Type 3.6VDC, working time up to 10 years (depends on configuration) RF Module complies to CE, FCC, ARIB Working temperature -40oC..+60oC (with LiSOCl2 AA battery) Dimensions H250xD30 Net-weight < 150 grams Housing Polycarbonate, IP67 Mounting Direct seating on soil surface Payload Data The following is the format of payload data will be sent to Sigfox server. Length is 10 bytes. Sensor type (1 byte) Status (1 byte) 1 st - Parameter (4 bytes) 2nd - Parameter (4 bytes) Meaning of Data in the Payload Data Size (byte) Bit Format Meaning Sensor type 1 all Uint8 Sensor type = 0x... means Simple Soil Moisture SensorSensor type = 0xFF means no sensor Status: battery level 1 Bit 7 and 6 Uint8 Battery capacity in 04 levels 11: battery level 4 (99%) 10: battery level 3 (60%) 01: battery level 2 (30%) 00: battery level 1 (10%) Status: error Bit 5 and 4 Node status 01: error 00: no error Status: alarm 1 Bit 3 and 2 Alarm status of 1st - Parameter (Y1 value)11 : Hi alarm 01 : Lo alarm 00 : No alarm Status: alarm 2 Bit 1 and 0 Alarm status of 2nd - Parameter (Y2 value)11 : Hi alarm 01 : Lo alarm 00 : No alarm 1st - Parameter 4 all Float Y1 value: Soil moisture in %RH 2nd - parameter 4 all Float Y2 value: Ambient temperature in oC Ordering Code Item code Descriptions WSSFC-CAPSM-9-01 SIGFOX CAPACITIVE SOIL MOISTURE AND TEMPERATURE SENSOR, PLASTIC LINING SENSOR, INTEGRATED SENSOR, INTERNAL ANTENNA, TYPE AA BATTERY 3.6VDC, IP68, RC2-RC3-RC4-RC5 ZONES WSSFC-CAPSM-9-02 SIGFOX CAPACITIVE SOIL MOISTURE AND TEMPERATURE SENSOR, PLASTIC LINING SENSOR, 1M CABLE, INTERNAL ANTENNA, TYPE AA BATTERY 3.6VDC, IP68, RC2-RC3-RC4-RC5 ZONES WSSFC-CAPSM-8-01 SIGFOX CAPACITIVE SOIL MOISTURE AND TEMPERATURE SENSOR, PLASTIC LINING SENSOR, INTEGRATED SENSOR, INTERNAL ANTENNA, TYPE AA BATTERY 3.6VDC, IP68, RC1-RC6-RC7 ZONES WSSFC-CAPSM-8-02 SIGFOX CAPACITIVE SOIL MOISTURE AND TEMPERATURE SENSOR, PLASTIC LINING SENSOR, 1M CABLE, INTERNAL ANTENNA, TYPE AA BATTERY 3.6VDC, IP68, RC1-RC6-RC7 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Lidar People Counter WSSFC-LPC SKU: WSSFC-LPC Doc No: WSSFC-LPC-DS-EN-10 Introduction WSSFC-LPC is a Sigfox sensor with built-in advanced Lidar sensor to detect and ranging people. It can count the people walk thru with accuracy higher than 90%. The sensor is not affected by temperature, humidity, RF noise and less affected by ambient light... With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on AA battery 1.5V in many years. Moreover, it can be powered by external power supply at the same time. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. High accuracy counting by Lidar; Distinguish people in and out; Sigfox Ready; Battery operated for many years; Plug & Play. Typical Applications People counter for public toilet People counter for Store, shop... Specification SENSOR SPECIFICATION Sensor technology Lidar Detection range max 4m Detection cone 27 degree Working temperature -40 .. + 60 oC Working humidity 0 .. 100% RH, non-condensing SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Functions Sending data in interval or when alarms occur Antenna Internal Antenna 2 dbi Configuration via offline USB cable (PC software is supplied at free) Power Supply Battery AA Type 1.5VDC and 7..48VDC (AC adapter not included RF Module complies to CE, FCC, ARIB Working temperature -40oC..+60oC (with Lithium Ultimate AA battery) Dimensions H120xW80xD45 Net-weight < 150 grams Housing Self-extinguisher ABS, Dust and vapor protection Mounting Ceiling mount Payload Data The following is the format of payload data will be sent to Sigfox server. Length is 10 bytes. Sensor type (1 byte) Status (1 byte) 1 st - Parameter (4 bytes) 2nd - Parameter (4 bytes) Meaning of Data in the Payload Data Size (byte) Bit Format Meaning Sensor type 1 all Uint8 Sensor type = 0x... means Simple Soil Moisture SensorSensor type = 0xFF means no sensor Status: battery level 1 Bit 7 and 6 Uint8 Battery capacity in 04 levels 11: battery level 4 (99%) 10: battery level 3 (60%) 01: battery level 2 (30%) 00: battery level 1 (10%) Status: error Bit 5 and 4 Node status 01: error 00: no error Status: alarm 1 Bit 3 and 2 Alarm status of 1st - Parameter (Y1 value)11 : Hi alarm 01 : Lo alarm 00 : No alarm Status: alarm 2 Bit 1 and 0 Alarm status of 2nd - Parameter (Y2 value)11 : Hi alarm 01 : Lo alarm 00 : No alarm 1st - Parameter 4 all Unint32 Y1 value: People-in counter value 2nd - parameter 4 all Unint32 Y2 value: People-out counter value Ordering Code Item code Descriptions WSSFC-LPC-9-01 SIGFOX LIDAR PEOPLE COUNTER, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP5X, RC2-RC3-RC4-RC5 ZONES WSSFC-LPC-8-01 SIGFOX LIDAR PEOPLE COUNTER, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP5X, RC1-RC6-RC7 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox CO Sensor WSSFC-G4-CO SKU: WSSFC-G4-CO Doc No: WSSFC-G4-CO-DS-EN-10 Introduction WSSFC-G4-CO is a Sigfox sensor with a built-in high performance electrochemical gas sensor to measure the concentration of Carbon Monoxide in the air. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery 1.5V for 2-5 years with 15 minutes update. It can support the following regions RC1, RC2, & RC4. High stability Electrochemical sensor ; Sigfox Ready; 2-5 years battery life with 15 minutes update; Plug & Play. Typical Applications Monitor the concentration of Carbon Monoxide in the air. Specification SENSOR SPECIFICATION Measurement Range Select: 0 to 200, 500, 1000 or 2000 ppm Detection Limit 1 ppb Resolution 1 ppb Repeatability < ± 2 % of reading Response Time T(90) < 35 seconds Expected Sensor Life 03 years in normal Air Expected Long Term Output Drift in air < 2 % signal loss per month Operating Temperature Range -40 to 50 °C Operating Humidity Range non-condensing 15 to 90% recommended continuous 0 to >95% RH - intermittent SIGFOX SPECIFICATION Sigfox zones select RC1-RC2-RC4 Antenna Internal Antenna 2 dbi Configuration via Downlink or offline USB cable (PC software is supplied at free) Battery 02 x AA Type 1.5VDC RF Module complies to CE, FCC, ARIB Working temperature -40°C..+60°C (using Energizer Lithium Ultimate AA battery) Dimensions H140xW73xD42 Net-weight 250 grams Housing Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-G4-CO-200-01 SIGFOX CARBON MONOXIDE GAS SENSOR, 0-200 PPM, 1PPB RESOLUTION, 4-SERIE, BATTERY AA 1.5V, IP67, FOR RC1-RC2-RC4 ZONES Link for full datasheet: https://filerun.daviteq.com/wl/?id=tPw2tEAxCL9vCbK7Vc46lGymbErkikEG Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Combustible Gas Sensor Sensor WSSFC-LPG SKU: WSSFC-LPG Doc No: WSSFC-LPG-DS-EN-10 Introduction WSSFC-LPG is a Sigfox sensor with a built-in electrochemical gas sensor to detect combustible gases such as methane, propane, iso-butane in the air. Sensor with its smart hardware and firmware design allows the sensor to operate with extremely low energy consumption while still delivering the best measurement efficiency as well as high accuracy and reliability. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. High stability Electrochemical sensor ; Sigfox Ready; Ultralow power design; Plug & Play. Typical Applications Detect combustible gases such as methane, propane, iso-butane in the air. Specification SENSOR SPECIFICATION Target gases Methane, propane, iso-butane Typical detection range 1 ~ 25%LEL of each gas Working temperature -10°C .. + 50°C Working humidity 0 .. 95% RH non-condensing SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2.67 dbi Configuration via offline USB cable (PC software is supplied at free) Power supply 7..48 VDC (without AC adapter) RF Module complies to CE, FCC, ARIB Working temperature -40°C..+60°C Dimensions H140xW73xD42 Net-weight 250 grams Housing Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-LPG-9-01 SIGFOX COMBUSTIBLE GAS SENSOR WITH SINTERED METAL PROTECTION FILTER, INTERNAL ANTENNA, EXTERNAL POWER SUPPLY 7..48 VDC, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-LPG-8-01 SIGFOX COMBUSTIBLE GAS SENSOR WITH SINTERED METAL PROTECTION FILTER, INTERNAL ANTENNA, EXTERNAL POWER SUPPLY 7..48 VDC, IP67, RC1-RC6-RC7 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Sound Level Sensor WSSFC-SL SKU: WSSFC-SL Doc No: WSSFC-SL-DS-EN-10 Introduction WSSFC-SL is a Sigfox sensor with a built-in digital sound level sensor to measure ambient sound level with high accuracy and stability. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery 1.5V for 2-5 years with 15 minutes update. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. High stability digital sound level sensor ; Sigfox Ready; 2-5 years battery life with 15 minutes update; Plug & Play. Typical Applications Monitor the ambient sound level. Specification SENSOR SPECIFICATION Measurement Range 55–110 dB Accuracy ±3 dB Resolution 0.1 dB Frequency Range 30–10,000 Hz SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2.67 dbi Configuration via offline USB cable (PC software is supplied at free) Battery 02 x AA Type 1.5VDC RF Module complies to CE, FCC, ARIB Working temperature -40°C..+60°C (using Energizer Lithium Ultimate AA battery) Dimensions H140xW73xD42 Net-weight 250 grams Housing Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-SL-9-01 SIGFOX SOUND LEVEL SENSOR 30-10.000 HZ, 55-110 DB, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-SL-8-01 SIGFOX SOUND LEVEL SENSOR 30-10.000 HZ, 55-110 DB, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Digital Input Sensor WSSFC-DI SKU: WSSFC-DI Doc No: WSSFC-DI-DS-EN-10 Introduction WSSFC-DI is a Sigfox sensor with 4 channel digital inputs to detect logic status 0/1 OR counting pulses from the water meter, gas meter, power meter, proximity sensor, limit switch, machine output, pressure switch… With Ultra-low-power design and smart firmware allow the sensor to run on a 2 x AA battery 1.5V for 10 years with one update per day. It can support all regions of the Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, and RC7. Logic detecting or Pulse counting with non-volatile memory; Sigfox Ready; 10 years of battery life with one update per day; Plug & Play. Typical Applications Counting the output pulses from the water meter, gas meter, power meter... Detect logic status of the proximity sensor, limit switch, machine output, pressure switch… Specification SENSOR SPECIFICATION Input 4 channel Digital inputs with dry-contact or voltage input (max 3.3VDC) Functions Logic Detecting or Pulse Counting Logic Detecting Max frequency 1KHz, default Filter time 300mS, adjustable 1 .. 65535 mS Pulse Counting Max frequency 1KHz, default Filter time 100mS, adjustable 1 .. 65535 mS Electrical connection Shielded cable 2m length with PG9 cable gland SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2.67 dbi Configuration via Downlink or offline USB cable (PC software is supplied for free) Battery 02 x AA Type 1.5VDC RF Module complies to CE, FCC, ARIB Working temperature -40°C..+60°C (using Energizer Lithium Ultimate AA battery) Dimensions H140xW73xD42 Net-weight 250 grams Housing Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-DI-14 SIGFOX-READY DIGITAL INPUT SENSOR WITH 4 CHANNEL DIGITAL INPUTS, SHIELDED CABLE 2M LENGTH WITH PG9 CABLE GLAND, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC2-RC3c-RC4 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Node RS485 Modbus Master WSSFC-MB485 SKU: WSSFC-MB485 Doc No: WSSFC-MB485-DS-EN-10 Introduction WSSFC-MB485 is a Sigfox node with RS485 port support ModbusRTU Master allow data reading from water meter, flow meter, power meter, gas meter, flow computer...  It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. Support RS485 ModbusRTU; Sigfox Ready; Plug & Play. Typical Applications Read data from water meter, flow meter, power meter, gas meter, flow computer...via RS485 / ModbusRTU port Specification Communication RS485 Slave Support 1 Slave Baud rate max 19600 Electrical connector M12-female, 4-pin A-coding Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2.67 dbi Configuration via offline USB cable (PC software is supplied at free) Power Supply 7-48VDC RF Module complies to CE, FCC, ARIB Working temperature -20 .. + 60 degC / 95%RH, non-condensing Dimensions H110xW73xD42 Net-weight 200 grams Housing Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-MB485-9-01 SIGFOX NODE RS485 MODBUS MASTER, 7-48VDC, IP67, M12 CONNECTOR, INTERNAL ANTENNA, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-MB485-8-01 SIGFOX NODE RS485 MODBUS MASTER, 7-48VDC, IP67, M12 CONNECTOR, INTERNAL ANTENNA, IP67, RC1-RC6-RC7 ZONES Link for full datasheet: https://filerun.daviteq.com/wl/?id=JqqTt5X2AWyGALKHovNhD98nf7SBUfUJ Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Ambient Temperature Sensor WSSFC-ATE SKU: WSSFC-ATE Doc No: WSSFC-ATE-DS-EN-10 Introduction WSSFC-ATE is a Sigfox sensor using a Digital temperature sensor that delivers highly accurate measurements in the range of -35°C to + 70°C. With ultra-low power consumption design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery 1.5V for 5-10 years with 15 minutes update. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. Digital sensor technology; Sigfox Ready; 5-10 years battery life with 15 minutes update; Plug & Play. Typical Applications Ambient temperature Monitoring for Factory; Ambient temperature Monitoring for Building; Ambient temperature Monitoring for Warehouse; Ambient temperature Monitoring for Data Center; Ambient temperature Monitoring for HVAC; ... Specification SENSOR SPECIFICATION Sensor Digital type, factory calibrated Measuring range -40°C .. + 85°C Accuracy +/- 0.5°C Resolution 0.125°C Electrical connection PG9 cable gland Sensor protection material / Rating PA / IP68 (for version with sensor cable) Sensor Filter PA (for version integrated sensor) SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2.67 dbi Configuration via offline USB cable (PC software is supplied at free) Battery 02 x AA Type 1.5VDC RF Module complies to CE, FCC, ARIB Working temperature -40°C..+60°C (using Energizer Lithium Ultimate AA battery) Dimensions H140xW73xD42 Net-weight 250 grams Housing Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-ATE-9-11 SIGFOX AMBIENT TEMPERATURE SENSOR, INTEGRATED TYPE , INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-ATE-8-11 SIGFOX AMBIENT TEMPERATURE SENSOR, INTEGRATED TYPE, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES WSSFC-ATE-9-12-500 SIGFOX AMBIENT TEMPERATURE SENSOR, 500MM CABLE TYPE , INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-ATE-8-12-500 SIGFOX AMBIENT TEMPERATURE SENSOR, 500MM CABLE TYPE, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Parking Lot Sensor WSSFC-PKS SKU: WSSFC-PKS Doc No: WSSFC-PKS-DS-EN-10 Introduction WSSFC-PKS is a Sigfox Parking Lot Sensor to detect occupancy of parking lot for Smart City, Smart building projects. The combination of Radar and magnetic technologies allow high accuracy with ultra-low power consumption. With robust design it can withstand up to 6 tons load and IP68 protection in case of flooding. With 2 x AA battery 3.6V it can run for 7-10 years in case 9 cars passed a day. It can supports all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. Self-learning algorithm with Radar and Magnetic technology; No maintenance and calibration at site required; Special internal antenna design; Easy Installation; IP68 rating; 7-10 years battery life with Popular battery type (LiSOCl2); Bluetooth V4.2 connection for configuration and FW upgrade; Tamper detection; Magnetic switch for manual triggering; Sigfox Ready; Typical Applications Parking lot Occupancy detection for Outdoor parking; Parking lot Occupancy detection for Indoor parking. Specification Sensor technologies Radar and Magnetic sensors with Self-learning algorithm Detection accuracy >= 98% Tamper detection sensor Magnetic type Manual triggering button Magnetic key, to trigger manual data sending Bluetooth communication Bluetooth V4.2 for Configuration, Diagnostic and FW upgrade Data sending * When state changing from vacant to occupied and vice versa* In pre-defined interval for heartbeat checking* When magnetic button is keyed Sigfox zones select RC1 to RC7 RF Power Max Sigfox Class 0, max +23.5 dbm, configurable Antenna Special Internal Antenna Design for High efficiency Configuration & FW upgrade via offline USB cable (PC software is supplied at free) or Bluetooth (via mobile app) Battery 02 x AA Type 3.6VDC LiSOCl2, battery life 7-10 years with 9 cars passed a day RF Module complies to CE, FCC, ARIB Working temperature and humidity -40°C..+85°C, 0-100% RH Dimensions H32xD180 Net-weight < 300 grams Housing PA6-35GF, IP68 Weight load max 6 tons Mounting Method Surface mount by Glue (included in accessories package) Accessories for installation Complete accessories package is included Ordering Code Item code Descriptions WSSFC-PKS-9-01 SIGFOX PARKING LOT SENSOR, RADAR & MAGNETIC PRINCIPLE, TAMPER DETECTION, MAGNETIC SWITCH, BLUETOOTH 4.2, IP68, INCLUDED 2 X AA 3.6V BATTERIES, -40 .. + 85C, RC2-RC3-RC4-RC5 ZONES * Please specify the RC zone when ordering Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox OZONE Sensor WSSFC-G4-O3 SKU: WSSFC-G4-O3 Doc No: WSSFC-G4-O3-DS-EN-10 Introduction WSSFC-G4-O3 is a Sigfox sensor with a built-in high performance electrochemical gas sensor to measure the concentration of Ozone (O3) in the air. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery 1.5V for 2-5 years with 15 minutes update. It can support the following regions RC1, RC2, & RC4. High stability Electrochemical sensor ; Sigfox Ready; 2-5 years battery life with 15 minutes update; Plug & Play. Typical Applications Monitor the concentration of Ozone gas (O3) in the air. Specification SENSOR SPECIFICATION Measurement Range Select: 0 to 5 or 100 ppm of O3 Detection Limit 1 ppb Resolution 1 ppb Repeatability < ± 2 % of reading Response Time T(90) < 60 seconds Expected Sensor Life 02 years in normal Air Expected Long Term Output Drift in air < 2 % signal loss per month Operating Temperature Range -40 to 50 °C Operating Humidity Range non-condensing 15 to 90% recommended continuous 0 to >95% RH - intermittent SIGFOX SPECIFICATION Sigfox zones select RC1-RC2-RC4 Antenna Internal Antenna 2 dbi Configuration via Downlink or offline USB cable (PC software is supplied at free) Battery 02 x AA Type 1.5VDC RF Module complies to CE, FCC, ARIB Working temperature -40°C..+60°C (using Energizer Lithium Ultimate AA battery) Dimensions H140xW73xD42 Net-weight 250 grams Housing Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-G4-O3-5-01 SIGFOX OZONE GAS SENSOR MODULE, 0-5 PPM, 1PPB RESOLUTION, 4-SERIE, BATTERY 1.5V, IP67, FOR RC1-RC2-RC4 ZONES Link for full datasheet: https://filerun.daviteq.com/wl/?id=DEM7XrPnDg4eo1P5cp62WwjNow148TWw Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Impact Rain Sensor WSSFC-IRS SKU: WSSFC-IRS Doc No: WSSFC-IRS-DS-EN-10 Introduction Sigfox impact rain sensor WSSFC-IRS is a new rain sensor technology. Unlike the traditional methods such as weighing or tipping bucket range gauge, this impact rain sensor has many unique advantages as no maintenance is required, providing real-time information on rain intensity, duration, and accumulated rainfall. It also can distinguish between rain and hail and provide data for both types of precipitation. The measurement principle is using an impact sensor located beneath the stainless steel cover to count every drop of rain. Raindrops hit the surface at their terminal velocity, which is a function of the raindrop diameter. Measurement is based on the acoustic detection of each raindrop as it impacts the sensor cover. Heavier drops create a more significant acoustic signal than smaller drops. Ultra-low-power design and smart firmware allow the complete Wireless and Sensor package to run on AA batteries for up to 10 years. It can support all regions of the Sigfox network over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. This Sigfox Impact Rain Sensor WSSFC-IRS is very suitable for remote area locations with a maintenance-free design and long battery life. Rain measurement for stationary or mobile in city, rural areas... Highlighted Features Compact & Light weight; Maintenance-free; Not affected by falling leaves, bird dropping; 5-10 years battery life; Distinguish between rain and hail; Report Rain intensity, precipitation and duration; IP67 Robust design for outdoor application; Sigfox Ready. Specification SENSOR SPECIFICATION Rain measurement Intensity, Precipitation and Duration Measuring range 0..200 mm/h Resolution 0.1 mm/h, 0.1mm Accuracy within +/- 10% of measurement Working atmospheric pressure 101.3 Kpa +/- 20% Working temperature -40 .. + 85 oC Working humidity up to 100% RH SIGFOX SPECIFICATION Sigfox zones select RC1-RC2-RC4 Antenna Internal Antenna 2 dbi Configuration via Downlink or offline USB cable (PC software is supplied at free) Battery 02 or 04 AA batteries, Type 1.5V or 3.6V Working temperature -40°C..+60°C when using Energizer L91 batteries-40°C..+85°C when using LiSOCl2 batteries Accessories Standard mounting bracket Dimensions D140xH45 without bracket Total net weight < 1kg, with bracket and batteries Ordering Code Item code Descriptions WSSFC-IRS-01 SIGFOX IMPACT RAIN SENSOR, 0-200MM/H, IP67, AA BATTERIES OPERATED, FOR RC1-RC2-RC4 Link for full datasheet: https://filerun.daviteq.com/wl/?id=d5ZH8aIXIdoXodAPS1mqDrhl52POwnni Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Ex d Approved Flammable Gas Sensor WSSFCEX-GHC SKU: WSSFCEX-GHC Doc No: WSSFCEX-GHC-DS-EN-10 Introduction WSSFCEX-GHC is a Sigfox sensor with explosion-proof approval, comes with a built-in high-performance NDIR technology sensor to detect the Hydrocarbon Gas concentration in the air. With Ultra-low-power design and smart firmware allow the complete Wireless and Sensor package to run on a single battery type D for 5 years or more with 15 minutes update. It can support the following regions RC1, RC2, RC3c, and RC4. Ex d approved; High-performance NDIR technology; Resistance to corrosion; Immunity from ‘poisoning’; Sensor life more than 10 years; Low maintenance; Sigfox Ready for RC1-RC2-RC3c-RC4; 5 years battery life with 15 minutes updates; Plug & Play. Typical Applications Monitor the hydrocarbon gas concentration in ambient air. Specification SENSOR SPECIFICATION Measurement technology High-performance NDIR Measurement Range 0 - 100% LEL Flammable Gas, equivalent to 0-5% Vol of Methane (CH4)* for the C3H8 gas application, please consult us before ordering Maximum response time (T90) < 40s Resolution 500 ppm (at 5% Vol)The resolution will vary with gas concentration due to the non-linear response to the target gas, therefore the best resolution will be at the low concentrations and will get worse as the concentration increases. Maximum deviation from linearity ± 0.1% vol Maximum variation of zero from −20 to +55°C ±30 ppm/°C Maximum non-reproducibility of zero at 20 °C ±500 ppm Maximum non-reproducibility of sensitivity at 20 °C <± 1000 ppm Long-term zero drift/month ±500 ppm Response to 0-90% change in RH at 20 °C (in target gas) +0.1% Vol (at 5% Vol) MTBF (lamp dependent only) >10 years Vibration Complies with EN 60079-29-1 Sensor Operating Temperature Range -20 to 60 °C Operating Pressure 700kPa to 1300kPa Operating Humidity Range 0 - 95% RH, non-condensing SIGFOX SPECIFICATION Sigfox zones select RC1-RC2-RC3c-RC4 Antenna External Antenna Configuration via Downlink or offline USB cable (PC software is supplied for free) Battery 01 x D type LiSOCl2 3.6V battery RF Module complies to CE, FCC, ARIB Electronics Working temperature -40°C..+85°C Housing Cast aluminum, powder-coated, IP66 ATEX Certificates IMQ 14 ATEX 005 X, TÜV CY 18 ATEX 0206158 X and IECEx DEK 15.0048X Marking ATEX II 2G Ex db IIC T5/T6 Gb and ATEX II 2D Ex tb IIIC T100/T85°C Db Directive ATEX 2014/34/EU Standards IEC-EN60079-0 IEC-EN60079-1 IEC-EN60079-31 Applicable zones Zone 1 - 21 (gas) and Zone 2 - 22 (dust) Mounting wall mounting holes Product dimensions H100xW100xD80 (excluded antenna) Net weight 1.5 kgs Packaging dimension W160 x D150 x H250 mm Gross weight < 1.6 kgs Ordering Code Item code Descriptions WSSFCEX-GHC-01 SIGFOX-READY FLAMMABLE GAS SENSOR, 0-100% LEL, EX APPROVED ZONES 1-2-21-22, BATTERY 3.6V, IP66, FOR RC1-RC2-RC3c-RC4 ZONES, IR SENSOR, CH4, 0-100% LEL Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox Precision Fuel Level Sensor WSSFC-CAP10 SKU: WSSFC-CAP10 Doc No: WSSFC-CAP10-DS-EN-10 Introduction WSSFC-CAP10 is a Sigfox fuel level sensor that utilizes the 10-year experience of Daviteq in digital capacitance measuring technique. It delivers high accuracy and stability with 0.1% of span. Ultra-low power design and smart firmware allow the complete Wireless and Sensor package to run on 2 x AA battery 1.5V for 2-5 years with 15 minutes updates. It can support the following regions RC1, RC2, & RC4. Monitoring fuel level and fuel consumption in fuel tanks of Genset, Boiler, Heavy equipment or machinery... Fuel management for Building, Factory, Construction Site, Remote Sites, BTS Tower... Applicable for many kinds of fluids: diesel, bio-diesel, vegetable oil, or any low viscosity non-conductive liquids Highlight Features High accuracy & stabilityThanks to Daviteq's digital capacitance measuring technique; Field-cuttable; Field-extendable; Sigfox Ready; 2-5 years battery life with 15 minutes updates; Plug & Play. Specification SENSOR SPECIFICATION Measurement Range (mm) Standard Range: 700, 1000, 1500, can be extended up to 4000 Accuracy +/- 0.1% of Span Resolution 0.1% Repeatability +/- 0.1% of span Thermal drift < + 0.03% of span per 10oC Connector M12 male, 4-pin, Coding A Sensor MTBF More than 10 years Sensor wetted materials Aluminum and engineering plastic Operating Temperature Range -40 to 85 °C Operating Humidity Range 0-100% RH Sensor rating IP67, outdoor Certification CE-Marking per EN61236-1 (with test report) Standard accessories Filter footer, flange, gasket, o-ring, self-tapping screws SIGFOX SPECIFICATION Sigfox zones select RC1-RC2-RC4 Antenna Internal Antenna 2 dbi Configuration via Downlink or offline USB cable (PC software is supplied at free) Battery 02 x AA Type 1.5VDC RF Module complies to CE, FCC, ARIB Working temperature -40°C..+60°C (using Energizer Lithium Ultimate AA battery) Dimensions H140xW73xD42 Net-weight 250 grams (Sigfox Device only) Housing Polycarbonate, IP67 Mounting Wall mount bracket Sensor cable 2m sensor cable with M12-male connector Ordering Code Item code Descriptions WSSFC-CAP10-8-1500 SIGFOX HIGH PRECISION CAPACITANCE FUEL LEVEL SENSOR FOR DIESEL OIL, VEGETABLE OIL, LUBRICANT, 1500MM, FIELD CUTTABLE, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1 ZONE WSSFC-CAP10-9-1500 SIGFOX HIGH PRECISION CAPACITANCE FUEL LEVEL SENSOR FOR DIESEL OIL, VEGETABLE OIL, LUBRICANT, 1500MM, FIELD CUTTABLE, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC4 ZONES TTL-LRW-USB-01 CONFIGURATION CABLE FOR LORAWAN OR SIGFOX SENSOR, TTL, USB CAP10PROEXT0700 CAP10 PROBE EXTENSION LENGTH 700 MM CAP10PROEXT1000 CAP10 PROBE EXTENSION LENGTH 1000 MM CAP10PROEXT1500 CAP10 PROBE EXTENSION LENGTH 1500 MM Link for full datasheet: https://filerun.daviteq.com/wl/?id=o1vv4n5tnZBoViW8pVcwXH6Iko41lPwY Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox-Ready Thermal mass Gas Flowmeter WSSFC-TMF128 SKU: WSSFC-TMF128 Doc No: WSSFC-TMF128-DS-EN-10 Introduction WSSFC-TMF128 is a Sigfox-Ready Thermal mass gas flow meter designed especially for Oxygen, Nitrogen, or Compressed Air flow measurement. It delivers accuracy better than 3% of reading plus 0.5% of span. It can be configured via Sigfox downlink or RS485 Modbus RTU. It supports the following regions RC1, RC2, & RC4. Available as DN8, DN15, DN20, and DN25 (G female thread) Accuracy better than 3% of reading plus 0.5% of span Connect to Sigfox network RC1, RC2 and RC4 Applications Flow measurement for Compressed Air; Flow measurement for Oxygen; Flow measurement for Nitrogen; Other gases... Specification FLOW SENSOR SPECIFICATION Process connection DN8, DN15, DN20, DN25 G-female threads (ISO 228-1), with removable flanges for convenient installation/maintenance Turndown ratio 50:1 Flow range at the actual condition Standard Flow Range (max velocity 100m/s)DN8: max 15 m3/hDN15: max 60 m3/hrDN20: max 120 m3/hrDN25: max 210 m3/hrLow Flow RangeDN8: max 3 m3/hDN15: max 12 m3/hrDN20: max 24 m3/hrDN25: max 42 m3/hr Accuracy +/- 3.0% of reading plus 0.5% of Span Medium Pressure range 0 .. 10 barg, max allowable pressure 16 barg Medium Temperature range -20 .. 85 oC, 0 .. 90% RH (non-condensation) Ambient Temperature range -40 .. + 85 oC Material 304SS, Polycarbonate Communication port RS485, Modbus RTU for configuration or connect to Master device SIGFOX SPECIFICATION Sigfox zones select RC1-RC2-RC4 Antenna Internal Antenna 2 dbi Configuration via Downlink or RS485 Modbus RTU Power supply 7..48VDC Connector M12-Male, 4-pin Coding A RF Module complies to CE, FCC, ARIB IP Rating IP67 Ordering Code Item code Descriptions WSSFC-TFM128-H-A-DN8 SIGFOX-READY THERMAL MASS FLOW METER FOR AIR, HIGH FLOW VERSION, INTERNAL ANTENNA, 7-48VDC, IP67, RC1-RC2-RC3-RC4 ZONES, SIZE DN8 WSSFC-TFM128-L-A-DN8 SIGFOX-READY THERMAL MASS FLOW METER FOR AIR, LOW FLOW VERSION, INTERNAL ANTENNA, 7-48VDC, IP67, RC1-RC2-RC3-RC4 ZONES, SIZE DN8 REPLACE "A" BY OTHER LETTER FOR DIFFERENT GAS B CO2 C O2 D N2 E Ar REPLACE "DN8" BY OTHER SIZE DN15 SIZE DN15 DN20 SIZE DN20 DN25 SIZE DN25 Link for full datasheet: https://filerun.daviteq.com/wl/?id=YucNDwcPRc6ePmehIeDSAXqh8duIgKcG Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Sigfox-Ready Ex d Approved Gas Sensor WSSFCEX-G SKU: WSSFCEX-G Doc No: WSSFCEX-G-DS-EN-10 Introduction WSSFCEX-G is a Sigfox-ready gas sensor with explosion-proof approval, comes with a selectable gas sensor module to measure different types of gas. With Ultra-low-power design and smart firmware allow the complete Wireless and Sensor package to run on a single battery type D for 5 years or more with 15 minutes update. It can support the following regions RC1, RC2, RC3c, and RC4. Ex d Approved; High-performance Electrochemical sensor; Calibration via downlink; Sigfox Ready for RC1-RC2-RC3c-RC4; 5 years battery life with 15 minutes updates; Plug & Play. Select Gas Modules Ethylene Ethylene Oxide Organic Acids Alcohols Carbon Monoxide Carbon Disulfide Chlorine, Br2, Bromine Chlorine Dioxide Hydrogen Hydrogen Hydrogen Peroxide Hydrogen Sulfide Hydrogen Bromide Hydrogen Chloride Hydrogen Fluoride Hydrogen Cyanide Ammonia Nitric Oxide Nitrogen Dioxide Oxygen Ozone Phosphine Silane Sulfur Dioxide Volatile Organic Compound Specification SENSOR SPECIFICATION Please contact us to get individual sensor specification sheet. SIGFOX SPECIFICATION Sigfox zones select RC1-RC2-RC3c-RC4 Antenna External Antenna Configuration via Downlink or offline USB cable (PC software is supplied for free) Battery 01 x D type LiSOCl2 3.6V battery RF Module complies to CE, FCC, ARIB Electronics Working temperature -40°C..+85°C Housing Cast aluminum, powder-coated, IP66 ATEX Certificates IMQ 14 ATEX 005 X, TÜV CY 18 ATEX 0206158 X and IECEx DEK 15.0048X Marking ATEX II 2G Ex db IIC T5/T6 Gb and ATEX II 2D Ex tb IIIC T100/T85°C Db Directive ATEX 2014/34/EU Standards IEC-EN60079-0 IEC-EN60079-1 IEC-EN60079-31 Applicable zones Zone 1 - 21 (gas) and Zone 2 - 22 (dust) Mounting wall mounting holes Product dimensions H100xW100xD80 (excluded antenna) Net weight 1.5 kgs Packaging dimension W160 x D150 x H250 mm Gross weight < 1.6 kgs Ordering Code Item code Descriptions WSSFCEX-G-X-Y SIGFOX-READY GAS SENSOR, EX D APPROVED ZONES 1-2-21-22, BATTERY 3.6V, IP66, FOR RC1-RC2-RC3c-RC4 ZONES -X: GAS NAME -Y: MEASUREMENT RANGE SELECT GAS SENSOR MODULES AS BELOW -CH2O-10 FORMALDEHYDE, 10 PPM -CH2O-50 FORMALDEHYDE, 50 PPM -CH2O-1000 FORMALDEHYDE, 1000 PPM -C2H4-10 ETHYLENE, 10 PPM -C2H4-200 ETHYLENE, 200 PPM -C2H4-1500 ETHYLENE, 1500 PPM -ETO-10 ETHYLENE OXIDE, 10 PPM -ETO-100 ETHYLENE OXIDE, 100 PPM -ETO-1000 ETHYLENE OXIDE, 1000 PPM for other sensors, please contact us. Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com