Sigfox AC Current Sensor WSSFC-AC SKU: WSSFC-AC Doc No: WSSFC-AC-DS-EN-10 Introduction WSSFC-AC is a Sigfox sensor with 1-channel AC current input 5A to measure the AC current load of your motors, machines...to count the energy consumption, OVER-load or NO-load detection, run hour counting...With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery up to 10 years. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7. Compatible with any 5A Current Transformer on the market ; Sigfox Ready; 10-year battery; Plug & Play. Typical Applications Monitor any electrical loads; Monitor load of Motor, Pump, Fan; Monitoring load of Air-Con, Fridge, Freezer... Specification SENSOR SPECIFICATION Measuring range 0..5A AC Accuracy 1.0% Resolution 10 bit Temperature Drift < 100 ppm Electrical connection cable 0.5m length with wire crimping connectors for SAFETY SIGFOX SPECIFICATION Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2 dbi Configuration via offline USB cable (PC software is supplied at free) Battery 02 x AA Type 1.5VDC, working time up to 10 years (depends on configuration) RF Module complies to CE, FCC, ARIB Working temperature -40oC..+60oC (using Energizer Lithium Ultimate AA battery) Dimensions H106xW73xD42 Net-weight 190 grams Housing Aluminum+Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-AC-9-11 SIGFOX SENSOR 1-CHANNEL AC CURRENT INPUT MAX 5A, CABLE 0.5M LENGTH WITH  WIRE CRIMPING CONNECTORS FOR SAFETY, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES WSSFC-AC-8-11 SIGFOX SENSOR 1-CHANNEL AC CURRENT INPUT MAX 5A, CABLE 0.5M LENGTH WITH  WIRE CRIMPING CONNECTORS FOR SAFETY, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com