Sigfox CO Sensor WSSFC-G4-CO

SKU: WSSFC-G4-CO

Doc No: WSSFC-G4-CO-DS-EN-10

Introduction

WSSFC-G4-CO is a Sigfox sensor with a built-in high performance electrochemical gas sensor to measure the concentration of Carbon Monoxide in the air. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery 1.5V for 2-5 years with 15 minutes update. It can support the following regions RC1, RC2, & RC4.

High stability Electrochemical sensor ;

Sigfox Ready;

2-5 years battery life with 15 minutes update;

Plug & Play.

Typical Applications

Monitor the concentration of Carbon Monoxide in the air.

Specification

SENSOR SPECIFICATION

Measurement Range

Select: 0 to 200, 500, 1000 or 2000 ppm

Detection Limit

1 ppb

Resolution

1 ppb

Repeatability

< ± 2 % of reading

Response Time

T(90) < 35 seconds

Expected Sensor Life

03 years in normal Air

Expected Long Term Output Drift in air

< 2 % signal loss per month

Operating Temperature Range

-40 to 50 °C

Operating Humidity Range

non-condensing 15 to 90% recommended continuous 0 to >95% RH - intermittent

SIGFOX SPECIFICATION

Sigfox zones

select RC1-RC2-RC4

Antenna

Internal Antenna 2 dbi

Configuration

via Downlink or offline USB cable (PC software is supplied at free)

Battery

02 x AA Type 1.5VDC

RF Module complies to

CE, FCC, ARIB

Working temperature

-40°C..+60°C (using Energizer Lithium Ultimate AA battery)

Dimensions

H140xW73xD42

Net-weight

250 grams

Housing

Polycarbonate, IP67

Mounting

Wall mount bracket

Ordering Code

Item code

Descriptions

WSSFC-G4-CO-200-01

SIGFOX CARBON MONOXIDE GAS SENSOR, 0-200 PPM, 1PPB RESOLUTION, 4-SERIE, BATTERY AA 1.5V, IP67, FOR RC1-RC2-RC4 ZONES

Link for full datasheet: https://filerun.daviteq.com/wl/?id=tPw2tEAxCL9vCbK7Vc46lGymbErkikEG

Link for manual:

Daviteq Technologies Inc

  www.daviteq.com   |     info@daviteq.com