Sigfox node with DULP input WSSFC-M12F SKU: WSSFC-M12F Doc No: WSSFC-M12F-DS-EN-10 Introduction WSSFC-M12F is the modular design Sigfox wireless sensor, based on 10-year experience in the design and manufacturing of Industrial sensors of Daviteq Company. It can accept the DULP signal from Daviteq DULP output sensors like ATE, ATH, AVS, AFD... With an Ultra-low-power design and smart firmware allow the complete Wireless and Sensor package run on a 2 x AA battery for up to 10 years. It can support all regions of the Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, and RC7. Sigfox Ready; 10-year battery; Plug & Play. Compatible DULP Sensors ATE - Ambient temperature sensor; ATH - Ambient humidity and temperature sensor; PTE - Process temperature sensor; AVS, AFD flow sensor Specification Sensor Input 1 x port DULP (Digital Ultra Low Power Signal) Sensor connector M12-F 4-pin, Coding A Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7 Antenna Internal Antenna 2dbi Configuration Downlink or via offline USB cable (PC software is supplied at free) Battery 02 x AA Type 1.5VDC, working time up to 10 years (depends on configuration) RF Module complies to CE, FCC, ARIB Working temperature -40oC..+60oC (using Energizer Lithium Ultimate AA battery) Dimensions H106xW73xD42 Net-weight 190 grams Housing Aluminum+Polycarbonate, IP67 Mounting Wall mount bracket Ordering Code Item code Descriptions WSSFC-M12F-01 SIGFOX NODE WITH DULP INPUT SENSOR, TYPE AA BATTERY 1.5VDC, IP67, M12-F FOR SENSOR CONNECTION Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com