Sigfox OZONE Sensor WSSFC-G4-O3

SKU: WSSFC-G4-O3 Doc No: WSSFC-G4-O3-DS-EN-10

Introduction

WSSFC-G4-O3 is a Sigfox sensor with a built-in high performance electrochemical gas sensor to measure the concentration of Ozone (O3) in the air. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery 1.5V for 2-5 years with 15 minutes update. It can support the following regions RC1, RC2, & RC4.

  • High stability Electrochemical sensor ;
  • Sigfox Ready;
  • 2-5 years battery life with 15 minutes update;
  • Plug & Play.
Typical Applications
  • Monitor the concentration of Ozone gas (O3) in the air.
WSSFC-G4-O3-H1.png WSSFC-G4-O3-H2.png
WSSFC-G4-O3-H3.png Interfering-Gas-for-Memprabor-O3-sensor.png
Specification
SENSOR SPECIFICATION
Measurement Range
Select: 0 to 5 or 100 ppm of O3
Detection Limit
1 ppb
Resolution
1 ppb
Repeatability
< ± 2 % of reading
Response Time
T(90) < 60 seconds
Expected Sensor Life
02 years in normal Air
Expected Long Term Output Drift in air
< 2 % signal loss per month
Operating Temperature Range
-40 to 50 °C
Operating Humidity Range
non-condensing 15 to 90% recommended continuous 0 to >95% RH - intermittent
SIGFOX SPECIFICATION
Sigfox zones select RC1-RC2-RC4
Antenna Internal Antenna 2 dbi
Configuration via Downlink or offline USB cable (PC software is supplied at free)
Battery 02 x AA Type 1.5VDC
RF Module complies to CE, FCC, ARIB
Working temperature -40°C..+60°C (using Energizer Lithium Ultimate AA battery)
Dimensions H140xW73xD42
Net-weight 250 grams
Housing Polycarbonate, IP67
Mounting Wall mount bracket
Ordering Code
Item code Descriptions

WSSFC-G4-O3-5-01

SIGFOX OZONE GAS SENSOR MODULE, 0-5 PPM, 1PPB RESOLUTION, 4-SERIE, BATTERY 1.5V, IP67, FOR RC1-RC2-RC4 ZONES


logo-01.png

Daviteq Technologies Inc

 

IconWebsite.png  www.daviteq.com   |   IconEmail.png  info@daviteq.com

 


Revision #12
Created Tue, Aug 10, 2021 2:55 AM by Lộc Vĩnh Nguyễn
Updated Fri, Aug 20, 2021 5:56 AM by Kiệt Anh Nguyễn