Sigfox Piezo-Electric 10KHz Vibration Sensor WSSFC-V1A

SKU: WSSFC-V1A Doc No: WSSFC-V1A-DS-EN-10

Introduction

WSSFC-V1A is a cost effective, Sigfox accelerometer single-axis vibration sensor designed for condition monitoring and preventive maintenance applications. The piezo-electric accelerometer is available in ranges ±25g or 50g and features a flat frequency response up to >10kHz. Its accelerometer feature a stable piezo-ceramic crystal in shear mode with low power electronics, sealed in a fully hermetic package. The Piezo Electric technology incorporated in the WSSCF-V1A accelerometer has a proven track record for offering the reliable and long-term stable output required for condition monitoring applications. The accelerometer is designed and qualified for machine health monitoring and has superior Resolution, Dynamic Range and Bandwidth to MEMS devices. Beside that it can also measure the temperature at mounting point. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery up to 10 years. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7.

  • 10KHz Bandwidth vibration sensor;
  • Sigfox Ready;
  • 10-year battery;
  • Plug & Play.
Compatible DULP Sensors
  • Machine Health Monitoring;
  • Predictive Maintenance Installations;
  • Vibration Monitoring;
  • Impact & Shock Monitoring;
  • Bearing monitoring......
WSSFC-V1A-H1.png WSSFC-V1A-H3.png
Specification
SENSOR SPECIFICATION
Sensor technology Hermetically Sealed, Piezo-Ceramic Crystal, Shear Mode
8-Parameter Measurement

Acceleration RMS & Peak

Velocity RMS & Peak

Displacement RMS & Peak

Frequency & Temperature

Acceleration Range ±25 or 50
Shock Limit (g) 10,000
Frequency Response and Resonant Frequency (Hz) 2-10000, >30000
Non-Linearity, Transverse Sensitivity ±2%FSO, < 5%
Temperature measuring and operating range, accuracy & resolution (°C) -40.. +85, +/- 0.5, 0.125
Sensor Material, housing protection and mounting 304SUS, IP67, M6 Screw
*Notes All above values are typical at +24°C, 80Hz
Connector M12-M 5-pin, Coding A
Cable 2m cable, wired to Sigfox node
SIGFOX SPECIFICATION
Sigfox zones select RC2-RC3-RC4-RC5 or RC1-RC6-RC7
Antenna Internal Antenna 2 dbi
Configuration via offline USB cable (PC software is supplied at free) and via Downlink
Battery 02 x AA Type 1.5VDC, working time up to 10 years (depends on configuration)
** 7 years working with 30 minutes update, RC4, 1 x transmit
RF Module complies to CE, FCC, ARIB
Working temperature -40oC..+60oC (using Energizer Lithium Ultimate AA battery)
Dimensions H106xW73xD42
Net-weight 190 grams
Housing Aluminum+Polycarbonate, IP67
Mounting Wall mount bracket
Ordering Code
Item code Descriptions

WSSFC-V1A-9-025

SIGFOX PIEZO-ELECTRIC 10KHZ VIBRATION SENSOR, +/- 25G, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES

WSSFC-V1A-8-025

SIGFOX PIEZO-ELECTRIC 10KHZ VIBRATION SENSOR, +/- 25G, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES


logo-01.png

Daviteq Technologies Inc

 

IconWebsite.png  www.daviteq.com   |   IconEmail.png  info@daviteq.com

 


Revision #9
Created Thu, Sep 10, 2020 8:31 PM by Lộc Vĩnh Nguyễn
Updated Wed, Aug 4, 2021 1:08 AM by Kiệt Anh Nguyễn