Sigfox Piezo-Electric 10KHz Vibration Sensor WSSFC-V1A

SKU: WSSFC-V1A

Doc No: WSSFC-V1A-DS-EN-10

Introduction

WSSFC-V1A is a cost effective, Sigfox accelerometer single-axis vibration sensor designed for condition monitoring and preventive maintenance applications. The piezo-electric accelerometer is available in ranges ±25g or 50g and features a flat frequency response up to >10kHz. Its accelerometer feature a stable piezo-ceramic crystal in shear mode with low power electronics, sealed in a fully hermetic package. The Piezo Electric technology incorporated in the WSSCF-V1A accelerometer has a proven track record for offering the reliable and long-term stable output required for condition monitoring applications. The accelerometer is designed and qualified for machine health monitoring and has superior Resolution, Dynamic Range and Bandwidth to MEMS devices. Beside that it can also measure the temperature at mounting point. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery up to 10 years. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7.

10KHz Bandwidth vibration sensor;

Sigfox Ready;

10-year battery;

Plug & Play.

Compatible DULP Sensors

Machine Health Monitoring;

Predictive Maintenance Installations;

Vibration Monitoring;

Impact & Shock Monitoring;

Bearing monitoring......

Specification

SENSOR SPECIFICATION

Sensor technology

Hermetically Sealed, Piezo-Ceramic Crystal, Shear Mode

8-Parameter Measurement

Acceleration RMS & Peak

Velocity RMS & Peak

Displacement RMS & Peak

Frequency & Temperature

Acceleration Range

±25 or 50

Shock Limit (g)

10,000

Frequency Response and Resonant Frequency (Hz)

2-10000, >30000

Non-Linearity, Transverse Sensitivity

±2%FSO, < 5%

Temperature measuring and operating range, accuracy & resolution (°C)

-40.. +85, +/- 0.5, 0.125

Sensor Material, housing protection and mounting

304SUS, IP67, M6 Screw

*Notes

All above values are typical at +24°C, 80Hz

Connector

M12-M 5-pin, Coding A

Cable

2m cable, wired to Sigfox node

SIGFOX SPECIFICATION

Sigfox zones

select RC2-RC3-RC4-RC5 or RC1-RC6-RC7

Antenna

Internal Antenna 2 dbi

Configuration

via offline USB cable (PC software is supplied at free) and via Downlink

Battery

02 x AA Type 1.5VDC, working time up to 10 years (depends on configuration)** 7 years working with 30 minutes update, RC4, 1 x transmit

RF Module complies to

CE, FCC, ARIB

Working temperature

-40oC..+60oC (using Energizer Lithium Ultimate AA battery)

Dimensions

H106xW73xD42

Net-weight

190 grams

Housing

Aluminum+Polycarbonate, IP67

Mounting

Wall mount bracket

Ordering Code

Item code

Descriptions

WSSFC-V1A-9-025

SIGFOX PIEZO-ELECTRIC 10KHZ VIBRATION SENSOR, +/- 25G, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES

WSSFC-V1A-8-025

SIGFOX PIEZO-ELECTRIC 10KHZ VIBRATION SENSOR, +/- 25G, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES

Link for full datasheet: https://filerun.daviteq.com/wl/?id=rf1Rddc6KQo4TjqglUCs4FgZaiTCcII7

Link for manual:

Daviteq Technologies Inc

  www.daviteq.com   |     info@daviteq.com