Sigfox-Ready Ex d Approved Gas Sensor WSSFCEX-G

SKU: WSSFCEX-G

Doc No: WSSFCEX-G-DS-EN-10

Introduction

WSSFCEX-G is a Sigfox-ready gas sensor with explosion-proof approval, comes with a selectable gas sensor module to measure different types of gas. With Ultra-low-power design and smart firmware allow the complete Wireless and Sensor package to run on a single battery type D for 5 years or more with 15 minutes update. It can support the following regions RC1, RC2, RC3c, and RC4.

Ex d Approved;

High-performance Electrochemical sensor;

Calibration via downlink;

Sigfox Ready for RC1-RC2-RC3c-RC4;

5 years battery life with 15 minutes updates;

Plug & Play.

Select Gas Modules

Ethylene

Ethylene Oxide

Organic Acids

Alcohols

Carbon Monoxide

Carbon Disulfide

Chlorine, Br2, Bromine

Chlorine Dioxide

Hydrogen

Hydrogen

Hydrogen Peroxide

Hydrogen Sulfide

Hydrogen Bromide

Hydrogen Chloride

Hydrogen Fluoride

Hydrogen Cyanide

Ammonia

Nitric Oxide

Nitrogen Dioxide

Oxygen

Ozone

Phosphine

Silane

Sulfur Dioxide

Volatile Organic Compound

Specification

SENSOR SPECIFICATION

Please contact us to get individual sensor specification sheet.

SIGFOX SPECIFICATION

Sigfox zones

select RC1-RC2-RC3c-RC4

Antenna

External Antenna

Configuration

via Downlink or offline USB cable (PC software is supplied for free)

Battery

01 x D type LiSOCl2 3.6V battery

RF Module complies to

CE, FCC, ARIB

Electronics Working temperature

-40°C..+85°C

Housing

Cast aluminum, powder-coated, IP66

ATEX Certificates

IMQ 14 ATEX 005 X, TÜV CY 18 ATEX 0206158 X and IECEx DEK 15.0048X

Marking

ATEX II 2G Ex db IIC T5/T6 Gb and ATEX II 2D Ex tb IIIC T100/T85°C Db

Directive

ATEX 2014/34/EU

Standards

IEC-EN60079-0 IEC-EN60079-1 IEC-EN60079-31

Applicable zones

Zone 1 - 21 (gas) and Zone 2 - 22 (dust)

Mounting

wall mounting holes

Product dimensions

H100xW100xD80 (excluded antenna)

Net weight

1.5 kgs

Packaging dimension

W160 x D150 x H250 mm

Gross weight

< 1.6 kgs

Ordering Code

Item code

Descriptions

WSSFCEX-G-X-Y

SIGFOX-READY GAS SENSOR, EX D APPROVED ZONES 1-2-21-22, BATTERY 3.6V, IP66, FOR RC1-RC2-RC3c-RC4 ZONES

-X: GAS NAME

-Y: MEASUREMENT RANGE

SELECT GAS SENSOR MODULES AS BELOW

-CH2O-10

FORMALDEHYDE, 10 PPM

-CH2O-50

FORMALDEHYDE, 50 PPM

-CH2O-1000

FORMALDEHYDE, 1000 PPM

-C2H4-10

ETHYLENE, 10 PPM

-C2H4-200

ETHYLENE, 200 PPM

-C2H4-1500

ETHYLENE, 1500 PPM

-ETO-10

ETHYLENE OXIDE, 10 PPM

-ETO-100

ETHYLENE OXIDE, 100 PPM

-ETO-1000

ETHYLENE OXIDE, 1000 PPM

for other sensors, please contact us.

Link for full datasheet:

Link for manual:

Daviteq Technologies Inc

  www.daviteq.com   |     info@daviteq.com