Introduction

WS433-CO2 sensor utilizes CMOSens® Technology for IR detection enables carbon dioxide measurements of the highest accuracy at a competitive price. Along with the NDIR measurement technology for detecting CO2 comes a best-in-class humidity and temperature sensor integrated on the same sensor module. Ambient humidity and temperature can be measured by special algorithm expertise through modelling and compensating of external heat sources without the need of any additional components. The wireless portion is Sub-GHz technology from Texas Instruments allows long range transmission at ultra-low power consumption. It will connect 2-way wirelessly to the wireless co-ordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software (thru the WS433-CL). Its default data rate is 50 kbps, can be switched to 625 bps to increase the communication range. The sensor can last up to 5 years with 2 x AA battery.

• NDIR CO2 sensor technology;

• Integrated temperature and humidity sensor;

• Best performance-to-price ratio;

• Dual-channel detection for superior stability;

• High performance Sub-GHz Wireless communication;
• Ultra-low power with 5 years battery;
• Plug & Play.

Typical Applications

Carbon Dioxide is a key indicator for indoor air quality. Thanks to new energy standards and better insulation, houses have become increasingly energy-efficient, but the air quality can deteriorate rapidly. Active ventilation is needed to maintain a comfortable and healthy indoor environment and improve the well-being and productivity of the inhabitants. Daviteq sensor solutions offer an accurate and stable monitoring of CO2 in the air, as well as temperature and humidity. This enables our customers to develop new solutions that increase energy efficiency and simultaneously support the well-being of everyone.

• Indoor Air Quality monitoring;
• HVAC Control;
• Green house;
• Smart Agriculture.

Introduction

WS433-PH100 is a wireless pH transmitter, it can connects to any standard pH sensor, with or without temperature sensor. It can support various kind of temperature sensor like Pt100, Pt1000, Thermistor...The transmitter can be configured with fix temperature compensation or automatic temperature compensation. It will connect 2-way wirelessly to the wireless co-ordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software (thru the WS433-CL). Its default data rate is 50 kbps, can be switched to 625 bps to increase the communication range. The sensor can last up to 10 years with 1 x AA battery.

• BNC connector for pH sensor;

• Automatic or manual temperature compensation;

• High performance Sub-GHz Wireless communication;
• Ultra-low power with 10 years battery;
• Plug & Play.

Typical Applications

• Drinking water;
• Waste water;
• Industrial water;
• Aquaculture;
• Hydroponics...

Introduction

WS433-AG is a wireless  Tilt Sensor, can be used to measure 3 tilt angles X, Y, Z of any object as Tower, Building, Tree, Electricity Tower, Telecom Tower, Bridges... The Tilt sensor utilises the combination of advanced Accelerometer and Gyro meter to deliver high accuracy and stable measurement of Tilt angle of 03 axis X,Y,Z. It will connect 2-way wirelessly to the wireless co-ordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software (thru the WS433-CL). Its default data rate is 50 kbps, can be switched to 625 bps to increase the communication range. The sensor can last up to 10 years with 1 x AA battery.

• Advanced Accelerometer with Gyro meter to deliver high accuracy and stable measurement of Tilt angle of 03 axis X,Y,Z;

• High performance Sub-GHz Wireless communication;
• Ultra-low power with 10 years battery;
• Plug & Play.

Typical Applications

Monitoring Tilt of:

Telecomunication Tower;

Electricity Tower;

Building;

Bridges;

Trees;

Monuments;

Any infrastructures.

Introduction

WSSFC-G4F-NH3 is a Wireless Sub-GHz sensor with a built-in advanced electrochemical gas sensor to measure Ammonia NH3 gas concentration with very high sensitivity for detecting the odor level in public toilets. The wireless portion is Sub-GHz technology from Texas Instruments allows long-range transmission at ultra-low power consumption. It will connect 2-way wirelessly to the wireless coordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via Modbus RTU software (thru the WS433-CL). Its default data rate is 50 kbps, which can be switched to 625 bps to increase the communication range. It can last up to 2-5 years with 2 AA batteries.

Highlight Features

• High stability Electrochemical sensor ;
• Sub-GHz Wireless Technology;
• 2-5 years battery life with 15 minutes updates;
• Plug & Play.

Introduction

WSSFC-G4F-H2S is a Wireless Sub-GHz sensor with a built-in advanced electrochemical gas sensor to measure H2S gas concentration with very high sensitivity for detecting the odor in waste bins in public. The wireless portion is Sub-GHz technology from Texas Instruments allows long-range transmission at ultra-low power consumption. It will connect 2-way wirelessly to the wireless coordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via Modbus RTU software (thru the WS433-CL). Its default data rate is 50 kbps, which can be switched to 625 bps to increase the communication range. It can last up to 2-5 years with 2 AA batteries.

Highlight Features

• High stability Electrochemical sensor ;
• Sub-GHz Wireless Technology;
• 2-5 years battery life with 15 minutes updates;
• Plug & Play.

Introduction

WS433-ULA is a Sub-GHz wireless ultrasonic level sensor to measure solid surface level in the trash bin for waste management systems ... This level sensor uses ultrasonic technology to measure the solid surface of waste, the principle is to measure the time of flight of the ultrasound pulse in the air environment. The ultrasound pulse will be ejected from the ultrasonic transducer, go thru the air and reach the solid surface of the waste, then reflected back to the ultrasonic transducer, the measuring circuit will measure the flight time of the pulse then calculate the distance from the transducer to the surface. The ultra-low power design and smart firmware allow the sensor to last for up to 10 years with just 2 x AA batteries (depending on configuration). The sensor will connect wirelessly to a Wireless Coordinator WS433-CL then export the data to RS485 / Modbus RTU and from there easily connect to any monitoring and control system. LOS distance from the sensor to the receiver is 1000m and can be extended by Extender.

Highlight Features

• High stability;
• Sub-GHz Wireless Technology;
• Ultra-low-power consumption;
• Plug & Play.