Product Data sheet for Sub-GHz Wireless Sensors Wireless CO2 Sensor with Humidity & Temperature WS433-CO2 SKU: WS433-CO2 Doc No: WS433-CO2-DS-EN-10 Introduction WS433-CO2 sensor utilizes CMOSens® Technology for IR detection enables carbon dioxide measurements of the highest accuracy at a competitive price. Along with the NDIR measurement technology for detecting CO2 comes a best-in-class humidity and temperature sensor integrated on the same sensor module. Ambient humidity and temperature can be measured by special algorithm expertise through modelling and compensating of external heat sources without the need of any additional components. The wireless portion is Sub-GHz technology from Texas Instruments allows long range transmission at ultra-low power consumption. It will connect 2-way wirelessly to the wireless co-ordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software (thru the WS433-CL). Its default data rate is 50 kbps, can be switched to 625 bps to increase the communication range. The sensor can last up to 5 years with 2 x AA battery. NDIR CO2 sensor technology; Integrated temperature and humidity sensor; Best performance-to-price ratio; Dual-channel detection for superior stability; High performance Sub-GHz Wireless communication; Ultra-low power with 5 years battery; Plug & Play. Typical Applications Carbon Dioxide is a key indicator for indoor air quality. Thanks to new energy standards and better insulation, houses have become increasingly energy-efficient, but the air quality can deteriorate rapidly. Active ventilation is needed to maintain a comfortable and healthy indoor environment and improve the well-being and productivity of the inhabitants. Daviteq sensor solutions offer an accurate and stable monitoring of CO2 in the air, as well as temperature and humidity. This enables our customers to develop new solutions that increase energy efficiency and simultaneously support the well-being of everyone. Indoor Air Quality monitoring; HVAC Control; Green house; Smart Agriculture. Specification SENSOR SPECIFICATION CO2 Sensor technology NDIR sensor CO2 range/resolution/accuracy 0-40.000 ppm / 1ppm / (+/- 30ppm + 3% reading) Repeatability +/- 10ppm Temperature Stability +/- 2.5ppm / oC in range 0-50 oC Temperature range/resolution/accuracy -40..+70oC / 0.1oC / ± 0.5 °C in range 0-50 oC Humidity range/resolution/accuracy 0-100%RH / 0.1%RH /+/- 3.0%RH in range 25-100% RH Sensor Filter 316SS sintered filter Sensor housing material / Rating SS316/SS304 / for Indoor use WIRELESS SPECIFICATION Data speed Up to 50kbps Transmission distance, LOS 1000m Antenna Internal Antenna Battery 02 x AA 1.5-3.6VDC, up to 5 years operation, depends on the configuration Frequency Band ISM 433MHz, Sub-GHz technology from Texas Instrument, USA International Compliance ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan) Vietnam Type Approval Certification QCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019) Security Standard AES-128 Operating temperature of PCB -40oC..+60oC (with AA L91 Energizer) Housing/Protection Aluminum+Polycarbonate / IP67 Dimension H180xW73xD42 Net weight <400 grams Ordering Code Item code Descriptions WS433-CO2-01 WIRELESS CARBON DIOXIDE GAS SENSOR, 433MHZ, 0-40.000PPM, 2 X AA 1.5 VDC BATTERY, IP67 Link for full datasheet: https://filerun.daviteq.com/wl/?id=k8VO8VoA2iCUsIbvvctyoJw7FvAZ0LNx Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Wireless Lidar People Counter WS433-LPC SKU: WS433-LPC Doc No: WS433-LPC-DS-EN-10 Introduction WS433-LPC is a sensor with built-in advanced Lidar sensor to detect and ranging people. It can count the people walk thru with accuracy higher than 90%. The sensor is not affected by temperature, humidity, RF noise and less affected by ambient light... The wireless portion is Sub-GHz technology from Texas Instruments allows long range transmission at ultra-low power consumption. It will connect 2-way wirelessly to the wireless co-ordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software (thru the WS433-CL). Its default data rate is 50 kbps, can be switched to 625 bps to increase the communication range. The sensor can last up to 5 years with type AA battery. High accuracy counting by Lidar; Distinguish people in and out; High performance Sub-GHz Wireless communication; Ultra-low power with 5 years battery; Plug & Play. Typical Applications People counter for public toilet People counter for Store, shop... Specification SENSOR SPECIFICATION Sensor technology Lidar Detection range max 4m Detection cone 27 degree Working temperature -40 .. + 60 oC Working humidity 0 .. 100% RH, non-condensing WIRELESS SPECIFICATION Data speed Up to 50kbps Transmission distance, LOS 1000m Antenna Internal Antenna Functions Sending data in interval or when alarms occur Battery Battery AA Type 1.5VDC and 7..48VDC (AC adapter not included Frequency Band ISM 433MHz, Sub-GHz technology from Texas Instrument, USA International Compliance ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan) Vietnam Type Approval Certification QCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019) Security Standard AES-128 Operating temperature of PCB -40oC..+60oC (with Lithium Ultimate AA battery) Housing/Protection Self-extinguisher ABS, Dust and vapor protection Mounting Ceiling mount Dimension H120xW80xD45 Net weight < 150 grams Ordering Code Item code Descriptions WS433-LPC-01 WIRELESS LIDAR PEOPLE COUNTER, 433MHZ, TYPE AA BATTERY 1.5VDC, IP5X Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Wireless 26GHz Lens Radar Level Sensor SKU: WS433-RD26L Doc No: WS433-RD26L-DS-EN-10 Introduction WS433-RD26L is K-band radar level sensor with special lens for Solid or Liquid measurement. With special lens design, it will be not affected by coagulation/hanging/operating medium/sediment and dust. It can measure up to 70m range with small beam angle 8 degree. The wireless portion is Sub-GHz technology from Texas Instruments allows long range transmission at ultra-low power consumption. It will connect 2-way wirelessly to the wireless co-ordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software (thru the WS433-CL). Its default data rate is 50 kbps, can be switched to 625 bps to increase the communication range. The complete set of wireless radar sensor can be powered by 12pcs x AA 1.5V,  can last up to 12 years. Not affected by Dust, Steam...; Range up to 70m; High performance Sub-GHz Wireless communication; Ultra-low power with 12 years battery; Plug & Play. Typical Applications Level measurement in Tank; Level measurement in Silo; Level measurement for Liquid or Solid; Coalmine Application Cement Application Dimension Drawings Specification SENSOR SPECIFICATION Sensor technology 26 GHz Pulse radar with lens Measurement range 10, 30, 70m Resolution 1.0 mm Accuracy +/- 5.0 mm Beam angle 8 degree Lens material Nylon/PEEK/PTFE/POM Process temperature -40 .. + 85oC standard, +120 oC optional Process pressure -1 .. + 4 barg Ambient working temperature -40 .. + 85 oC Ambient working humidity 0 .. 95% RH, non-condensing WIRELESS SPECIFICATION Data speed Up to 50kbps Transmission distance, LOS 1000m Antenna External Antenna 0 dbi Functions Sending data in interval Battery 12 x Battery AA Type 1.5VDC and 7..48VDC Frequency Band ISM 433MHz, Sub-GHz technology from Texas Instrument, USA International Compliance ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan) Vietnam Type Approval Certification QCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019) Security Standard AES-128 Ambient Operating temperature of complete set -40oC..+60oC (with Lithium Ultimate AA battery) Housing/Protection Cast aluminum, Polycarbonate, IP67 Mounting Direct mount on flange Dimension 220x220x450 (without antenna) Net weight <= 10 kgs Ordering Codes Item code Descriptions WS433-RD26L-SL-01 WIRELESS 26GHZ RADAR LEVEL SENSOR WITH PA LENS FOR SOLID IN HIGH DUST ENVIRONMENT, SUS304 JIS10K 100A RF FLANGE, 0-30M CALIBRATED RANGE, -40 .. + 85 C, IP67 ALUMINUM HOUSING WS433-RD26L-SL-02 WIRELESS 26GHZ RADAR LEVEL SENSOR WITH PA LENS FOR SOLID IN HIGH DUST ENVIRONMENT, SUS304 JIS10K 100A RF FLANGE, 0-70M CALIBRATED RANGE, -40 .. + 85 C, IP67 ALUMINUM HOUSING Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Wireless pH Transmitter WS433-PH100 SKU: WS433-PH100 Doc No: WS433-PH100-DS-EN-10 Introduction WS433-PH100 is a wireless pH transmitter, it can connects to any standard pH sensor, with or without temperature sensor. It can support various kind of temperature sensor like Pt100, Pt1000, Thermistor...The transmitter can be configured with fix temperature compensation or automatic temperature compensation. It will connect 2-way wirelessly to the wireless co-ordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software (thru the WS433-CL). Its default data rate is 50 kbps, can be switched to 625 bps to increase the communication range. The sensor can last up to 10 years with 1 x AA battery. BNC connector for pH sensor; Automatic or manual temperature compensation; High performance Sub-GHz Wireless communication; Ultra-low power with 10 years battery; Plug & Play. Typical Applications Drinking water; Waste water; Industrial water; Aquaculture; Hydroponics... Specification MEASUREMENT SPECIFICATION pH Sensor Input pH sensor pH Measuring range pH 0 .. 14 Resolution pH 0.1 Accuracy +/- 0.1 Temperature Sensor Input Pt100, Pt1000, Thermistor Temperature measuring range 0 - 100 oC Temperature resolution 0.1 oC Working temperature -40 .. 60 oC pH Connector BNC Temperature Connector Terminal block WIRELESS SPECIFICATION Data speed Up to 50kbps Transmission distance, LOS 1000m Antenna Internal Antenna Battery 1 x AA 1.5-3.6VDC, up to 10 years operation, depends on the configuration Frequency Band ISM 433MHz, Sub-GHz technology from Texas Instrument, USA International Compliance ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan) Vietnam Type Approval Certification QCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019) Security Standard AES-128 Operating temperature of PCB -40oC..+60oC (with AA L91 Energizer) Housing/Protection Polycarbonate, POM, SUS304 / IP67 Mounting method U-Bolt 42mm, SUS304 Dimension H220xD41 Net weight <500 grams Ordering Code Item code Descriptions WS433-PH100-01 WIRELESS PH TRANSMITTER 433MHZ, COMPATIBLE WITH ANY PH SENSOR PH 0-14 WITH Pt100 TEMPERATURE SENSOR COMPENSATION, AA 1.5-3.6VDC BATTERY, IP67 WS433-PH100-02 WIRELESS PH TRANSMITTERT 433MHZ, COMPATIBLE WITH ANY PH SENSOR PH 0-14 WITH Pt1000 TEMPERATURE SENSOR COMPENSATION, AA 1.5-3.6VDC BATTERY, IP67 PH-H087-0020 PH SENSOR COMBO, IN-LINE, 3/4NPT PH COMBO, IN-LINE, CPVC, 3/4"NPT, ASGV FLAT, PT100 OHM, DJ, AG/AGCL, GEL, CE, 20F CABLE, BNC & T Link for full datasheet: https://filerun.daviteq.com/wl/?id=fMrBbgJaGbQS3QZPo5DPkjwpUQx5zcPK Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Wireless 3-AXIS Tilt Sensor WS433-AG SKU: WS433-AG Doc No: WS433-AG-DS-EN-10 Introduction WS433-AG is a wireless  Tilt Sensor, can be used to measure 3 tilt angles X, Y, Z of any object as Tower, Building, Tree, Electricity Tower, Telecom Tower, Bridges... The Tilt sensor utilises the combination of advanced Accelerometer and Gyro meter to deliver high accuracy and stable measurement of Tilt angle of 03 axis X,Y,Z. It will connect 2-way wirelessly to the wireless co-ordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software (thru the WS433-CL). Its default data rate is 50 kbps, can be switched to 625 bps to increase the communication range. The sensor can last up to 10 years with 1 x AA battery. Advanced Accelerometer with Gyro meter to deliver high accuracy and stable measurement of Tilt angle of 03 axis X,Y,Z; High performance Sub-GHz Wireless communication; Ultra-low power with 10 years battery; Plug & Play. Typical Applications Monitoring Tilt of:Telecomunication Tower; Electricity Tower; Building; Bridges; Trees; Monuments; Any infrastructures. Specification SENSORS SPECIFICATION: Tilt Sensor Built-in advanced accelerometer and gyro meter to deliver tilt angle measurement of X, Y, Z Measurement range ± 90° of XYZ Resolution 0.5° Sensor sampling rate 1Hz max WIRELESS SPECIFICATION Data speed Up to 50kbps Transmission distance, LOS LOS 500m Antenna Internal Antenna, 3 dbi Battery 01 x AA 1.5-3.6VDC, up to 10 years operation, depends on the configuration Frequency Band ISM 433MHz, Sub-GHz technology from Texas Instrument, USA International Compliance ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan) Vietnam Type Approval Certification QCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019) Security Standard AES-128 Operating temperature of PCB -40oC..+60oC (with AA L91 Energizer) Housing/Protection Poly-carbonate, IP68 Mounting method Mounting bracket for wall mount Dimension 125x30x30mm Net weight 60g Ordering Code Item code Descriptions WS433-AG-01 WIRELESS 3-AXIS TILT SENSOR 433MHZ, AA 1.5-3.6VDC BATTERY, IP67 Link for full datasheet: https://filerun.daviteq.com/wl/?id=uvLXDHdZykf0Wap4RCFEQENu66cvr4lm Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Wireless NH3 Ammonia Gas Sensor WS433-G4F-NH3 SKU: WSSFC-G4F-NH3 Doc No: WSSFC-G4F-NH3-DS-EN-10 Introduction WSSFC-G4F-NH3 is a Wireless Sub-GHz sensor with a built-in advanced electrochemical gas sensor to measure Ammonia NH3 gas concentration with very high sensitivity for detecting the odor level in public toilets. The wireless portion is Sub-GHz technology from Texas Instruments allows long-range transmission at ultra-low power consumption. It will connect 2-way wirelessly to the wireless coordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via Modbus RTU software (thru the WS433-CL). Its default data rate is 50 kbps, which can be switched to 625 bps to increase the communication range. It can last up to 2-5 years with 2 AA batteries. Highlight Features High stability Electrochemical sensor ; Sub-GHz Wireless Technology; 2-5 years battery life with 15 minutes updates; Plug & Play. Specification SENSOR SPECIFICATION Measuring range NH3 0..100 ppm Max detecting concentration 200 ppm Repeatability < 10% of Reading value Resolution 0.1 ppm Stability / month < 10% of Reading value Zero stability < 1% of full scale Working temperature -20 .. + 50 oC Working humidity 15 .. 90% RH Working atmospheric pressure 101.3 Kpa +/- 10 Kpa Sensor life 2 years WIRELESS SPECIFICATION Data speed 50kbps (default), 625 bps Transmission distance, LOS 400m (2m height from ground) Antenna Internal Antenna Battery 02 x AA 1.5VDC Frequency Band ISM 433.92 Mhz, Sub-GHz technology from Texas Instrument, USA International Compliance ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan) Vietnam Type Approval Certification QCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019) Security Standard AES-128 Dimensions (mm) Diameter 95 x H40 Net-weight < 200 grams Housing ABS self-extinguishing Mounting Method Ceiling mount Ordering Code WS433-G4F-NH3-100-01 WIRELESS NH3 AMMONIA GAS SENSOR, 433MHZ, VERY HIGH SENSITIVITY TYPE, 0-100 PPM, 4-SERIE, BATTERY 1.5V, CEILING MOUNT Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Wireless H2S Hydrogen Sulfide Gas Sensor WS433-G4F-H2S SKU: WSSFC-G4F-H2S Doc No: WSSFC-G4F-H2S-DS-EN-10 Introduction WSSFC-G4F-H2S is a Wireless Sub-GHz sensor with a built-in advanced electrochemical gas sensor to measure H2S gas concentration with very high sensitivity for detecting the odor in waste bins in public. The wireless portion is Sub-GHz technology from Texas Instruments allows long-range transmission at ultra-low power consumption. It will connect 2-way wirelessly to the wireless coordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via Modbus RTU software (thru the WS433-CL). Its default data rate is 50 kbps, which can be switched to 625 bps to increase the communication range. It can last up to 2-5 years with 2 AA batteries. Highlight Features High stability Electrochemical sensor ; Sub-GHz Wireless Technology; 2-5 years battery life with 15 minutes updates; Plug & Play. Specification SENSOR SPECIFICATION Measuring range H2S 0..100 ppm Max detecting concentration 500 ppm Linearity < 0.1 ppm Resolution 0.1 ppm Long term output drift < 15% per year Zero stability < 1% of full scale Working temperature -30 .. + 50 oC Working humidity 15 .. 90% RH Working atmospheric pressure 101.3 Kpa +/- 10 Kpa Sensor life 2 years WIRELESS SPECIFICATION Data speed 50kbps (default), 625 bps Transmission distance, LOS 400m (2m height from ground) Antenna Internal Antenna Battery 02 x AA 1.5VDC Frequency Band ISM 433.92 Mhz, Sub-GHz technology from Texas Instrument, USA International Compliance ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan) Vietnam Type Approval Certification QCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019) Security Standard AES-128 Dimensions (mm) Diameter 95 x H40 Net-weight < 200 grams Housing ABS self-extinguishing Mounting Method Ceiling mount Ordering Code WS433-G4F-H2S-100-01 WIRELESS H2S HYDROGEN SULFIDE GAS SENSOR, 433MHZ, VERY HIGH SENSITIVITY TYPE, 0-100 PPM, 4-SERIE, BATTERY 1.5V, CEILING MOUNT Link for full datasheet: Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Wireless Ultrasonic Level Sensor for Small trash bin WS433-ULA SKU: WS433-ULA Doc No: WS433-ULA-DS-EN-10 Introduction WS433-ULA is a Sub-GHz wireless ultrasonic level sensor to measure solid surface level in the trash bin for waste management systems ... This level sensor uses ultrasonic technology to measure the solid surface of waste, the principle is to measure the time of flight of the ultrasound pulse in the air environment. The ultrasound pulse will be ejected from the ultrasonic transducer, go thru the air and reach the solid surface of the waste, then reflected back to the ultrasonic transducer, the measuring circuit will measure the flight time of the pulse then calculate the distance from the transducer to the surface. The ultra-low power design and smart firmware allow the sensor to last for up to 10 years with just 2 x AA batteries (depending on configuration). The sensor will connect wirelessly to a Wireless Coordinator WS433-CL then export the data to RS485 / Modbus RTU and from there easily connect to any monitoring and control system. LOS distance from the sensor to the receiver is 1000m and can be extended by Extender. Highlight Features High stability; Sub-GHz Wireless Technology; Ultra-low-power consumption; Plug & Play. Specification SENSOR SPECIFICATION Sensor Ultrasonic sensor, dual transducer Measurement range 30 .. 1500 mm Resolution & accuracy 1.0mm, +/- 10 mm Sensor sampling rate configurable from 10s up to 3600s Working temperature -15 .. + 50 oC Working humidity 0 .. 95% RH, non condensation WIRELESS SPECIFICATION Data speed 50kbps (default), 625 bps Transmission distance, LOS 400m (2m height from ground) Antenna Internal Antenna Battery 02 x AA 1.5VDC Frequency Band ISM 433.92 Mhz, Sub-GHz technology from Texas Instrument, USA International Compliance ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan) Vietnam Type Approval Certification QCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019) Security Standard AES-128 Dimensions (mm) 100x56x46.5 Net-weight < 200 grams Housing POM Mounting Method Top mount Ordering Code WS433-ULA-01 WIRELESS 433MHZ ULTRASONIC LEVEL SENSOR FOR SMALL TRASH BIN, 30-1500MM RANGE, BATTERY 1.5V, TOP MOUNT Link for full datasheet: https://filerun.daviteq.com/wl/?id=xiZPeaSW3mCNq7NuFpoqEGgS4gypvxXq Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com Wireless Sub-GHz Laser Level Sensor WS433-LSL SKU: WS433-LSL Doc No: WS433-LSL-DS-EN-10 Introduction WS433-LSL is a low-power laser level sensor for Solid level measurement. With a dust tube accessory, it can be used in high dust environments like cement, grain, powder... It can measure up to 100m range. The wireless portion is Sub-GHz technology allows long-range transmission at ultra-low power consumption. It will connect wirelessly to a Wireless Co-ordinator WS433-CL or an IoT gateway with a built-in Coordinator. It can be configured the operation parameters like data sending interval, health check cycle... The complete set of the wireless laser-level sensor can be powered by 6 x AA 1.5V batteries for up to 10 years (depending on interval time). Range up to 100m; Support Sub-GHz wireless; Ultra-low power with 10 years battery; Plug & Play. Typical Applications Level measurement in Tank; Level measurement in Silo; Level measurement for any non-dark surface. Dimension Drawings Specification SENSOR SPECIFICATION Sensor technology Eye-safe laser level sensor, class II laser Measurement range Select 50, 100m Dead zone 0.03 m Resolution 1.0 mm Accuracy +/- 5.0 mm Dust tube Yes, standard Air purging port 1/4" NPT quick connector Process temperature -10 .. + 60 oC standard Ambient working temperature -10 .. + 60 oC Ambient working humidity 0 .. 95% RH, non-condensing WIRELESS SPECIFICATION Data speed 50kbps (default), 625 bps Transmission distance, LOS 400m (2m height from ground) Antenna Internal Antenna Battery 06 x AA 1.5VDC Frequency Band ISM 433.92 Mhz, Sub-GHz technology from Texas Instrument, USA International Compliance ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan) Vietnam Type Approval Certification QCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019) Security Standard AES-128 Mounting Method JIS10K 80A Flange Ambient temperature -10oC..+60oC (with AA L91 Energizer) Dimensions 220x220x450 (without antenna) Net-weight < 5 kgs Housing Aluminum + Polycarbonate plastic, IP67 Ordering Codes Item code Descriptions WS433-LSL-50 WIRELESS SUB-GHZ LASER LEVEL SENSOR, RANGE 50M, 3-INCH FLANGE, DUST TUBE, IP67, AA BATTERY POWERED WS433-LSL-100 WIRELESS SUB-GHZ LASER LEVEL SENSOR, RANGE 100M, 3-INCH FLANGE, DUST TUBE, IP67, AA BATTERY POWERED Link for full datasheet: https://filerun.daviteq.com/wl/?id=cyV6RMRRCwKzTu0Azj9i4XUuzZiP0oHd Link for manual: Daviteq Technologies Inc  www.daviteq.com   |     info@daviteq.com