Sub-Ghz Ex d Wireless Bridges
SKU: WS433-BLEX
WS433-BLEX is a range of Sub-Ghz wireless bridges to replace the RS485 cable or network. It has Ex d approval for installation in Zone 1, Zone 2 or Safe Zone. LOS Distance is up to 6000m at baud rate 38400. This wireless technology will save time, labor cost & cable cost as well. Optional integrated IoT gateway (iConnector) allows easily configure & diagnose remotely or monitoring / controls via any IoT Platform as welll. The deployment of these wireless devices can be done in just 15 minutes!
ROBUST WIRELESS CONNECTION
- Sub-Ghz technology from Texas Instruments delivers a Robust Wireless connection with AES-128 Security
6000M LOS DISTANCE
- High performance engineered RF circuit to deliver the long range distance
ANY PROTOCOL! NOT only MODBUS
- Transparent connection allows the network nodes can talk in any protocol
SIMPLE CONFIGURATION
- Wireless Bridges are easily configured by an offline tool or remotely by online tool (Globiots)
REMOTE CONFIGURATION & DIAGNOSTIC
- With integrated IoT Gateway (iConnector), the configuration & diagnostic of entire network can be done remotely via Globiots platform
REMOTE MONITORING & CONTROLS
- With integrated IoT Gateway (iConnector), the wireless nodes can be monitored and controlled remotely via Globiots or any IoT platform
| Communication | RS485, RS232 (optional) |
| Wireless data rate | 50kbps (support baud rate 38400) |
| Tranmission distance | LOS 6000m @ 50 kpbs (lowest Antenna height is 4m) |
| Antenna | Standard external antenna -1.1 dBi for slave node, 3.0 dbi for master node (option 6 & 9 dbi) |
| Power supply | 7..48 Vdc @ 500mA max |
| Electrical connection | 01 x M25 conduit (cable gland is not included) |
| RF frequency band | Free license ISM 433.92Mhz (for others 868, 915, 920Mhz, refer related datasheets) |
| Ready to comply | ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan)** |
| Vietnam Type Approval Certification | QCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019) |
| ATEX Certificates | IMQ 14 ATEX 005 X and TÜV CY 18 ATEX 0206158 X |
| Makring | ATEX II 2G Ex db IIC T5/T6 Gb and ATEX II 2D Ex tb IIIC T100/T85°C Db |
| Directive | ATEX 2014/34/EU |
| Standards | IEC-EN60079-0 IEC-EN60079-1 IEC-EN60079-31 |
| Applicable zones | Zone 1 - 21 (gas) and Zone 2 - 22 (dust) |
| Data encryption | AES-128 |
| Ambient working temperature | -40oC..+85oC |
| Housing | Cast aluminium, powder coated, IP66 |
| Mounting | wall mounting holes |
| Product dimensions | H100xW100xD80 (excluded antenna) |
| Net weight | 1.3 kgs |
| Packaging dimension | W160 x D150 x H100 mm |
| Gross weight | < 1.5 kgs |
| ITEM CODES | DESCRIPTIONS |
| WS433-BLEX-RS485-M3 | Wireless bridge, Ex d approved, Master, RS485, external antenna 3dbi with 5m RF cable |
| WS433-BLEX-RS485-S2 | Wireless bridge, Ex d approved, Slave, RS485, external integrated antenna -1.1dbi |
| STHC-X-ISG02DB-WS433-BLEX-RS485-M3 | iConnector 3G Dual Band*, Ex d, external GSM antenna 2.3 dbi N-male, RS485/ModbusRTU with built-in wireless bridge, master RS485, external antenna 3dbi with 5m RF cable |
| STHC-X-ISG02-WS433-BLEX-RS485-M3 | iConnector 3G Penta Band*, Ex d, external GSM antenna 2.3 dbi N-male, RS485/ModbusRTU with built-in wireless bridge, master RS485, external antenna 3dbi with 5m RF cable |
| STHC-X-ISGWF-WS433-BLEX-RS485-M3 | iConnector WiFi*, Ex d, external WiFi antenna 4.48 dbi N-male, RS485/ModbusRTU with built-in wireless bridge, master RS485, external antenna 3dbi with 5m RF cable |
| **ACCESSORIES FOR CELLULAR IOT GATEWAY (ICONNECTOR)** | |
| SIMMOBI-3G | Mobifone DATA sim card, with sms (receive only), sending sms is in additional cost (for Vietnam only) |
| SIMMOBI-10K-01Y | 12-month Data plan of Mobifone sim card, unlimited data, GPRS/EDGE/UMTS/HSPA (Vietnam only) |
| **OPTIONAL ANTENNA & ITS ACCESSORIES** | |
| OMB.433.B03F21 | 433MHz 3dBi OMNI antenna, IP65, N-female, L=523mm, c/w Male-Male N-Adapter P/N 26-8009 (excluded cable) |
| OMB.433.B06F21 | 433MHz 6dBi OMNI antenna, IP65, N-female, L=1094mm, c/w Male-Male N-Adapter P/N 26-8009 (excluded cable) |
| CAB.953 | Low lost antenna cable, 5m, N-female and SMA-male |
| ADAPT/N-TYPEM/SMAF | N-male to SMA-Female adapter |
| **OTHER ACCESSORIES** | |
| RS485-FM12-USB-1 | RS485/USB multi-purpose Configuration cable** with connector m12 male, female and flying leads, with Power adapter 12VDC/2.0A |
| NOTES | * Refer datasheet of iConnector STHC to find more information. |
| ** Order RS485-FM12-USB-1 to configure wireless bridge and iConnector |
