Process Free Chlorine Sensor with Modbus output MBRTU-FCL
SKU: | Doc No : |
Introduction
| Typical Applications
Swimming pools; SPAs; Industrial Process; Municipal Water; ... |
Specification
| |
| |
| |
|
|
| |
CHLORINE SENSOR SPECIFICATION | |
Sensing Technology | Two-electrode ampero-metric technology with gas permeable membranes (replaceable) |
Measuring range | 0-10mg/L or 0-20mg/L |
Accuracy & Resolution | +/- 0.1 mg/L |
Repeatability | +/- 0.05 mg/L (25 oC) |
Response Time | T90 < 90s (25 oC) |
Working Condition | 0 .. 50 oC with pH = 5 .. 9 |
Working Pressure | 0 .. 15 psig |
Flow range | 30 .. 60 L/h or 0.6 .. 1.3 cm/s |
Output | RS485 ModbusRTU |
Power supply | 9..36VDC, avg. < 200mA |
Conditioning | New, first start-up: at least 4hours Restart-up: < 30 min. |
Calibration | One Point - Manual with DPD |
Interferences | ClO2, Ozone, Bromine Cyanuric Acid compatible |
Process connection | 1/2" NPT |
Wetted parts | PVC, Silicone, ABS |
Sensor Cable | 6m with BNC connector |
Rating | IP68 |
Sensor Dimension | D21.3 x 219 (mm) |
Sensor net weight | < 200 grams |
Warranty | 1 year for probe, membrane for 03 months |
Ordering Code
Item code | Descriptions |
| PROCESS RESIDUAL CHLORINE SENSOR WITH TEMPERATURE COMPENSATION, 0-10MG/L, IP68, 1/2" NPT SUBMERSIBLE, 4-20MA OUTPUT, 6-12VDC |
| PROCESS RESIDUAL CHLORINE SENSOR WITH TEMPERATURE COMPENSATION, 0-20MG/L, IP68, 1/2" NPT SUBMERSIBLE, 4-20MA OUTPUT, 6-12VDC |
Replaceable spare-parts | |
RC66-MEM1 | CHLORINE MEMBRANE FOR A420-FCL |
RF0CR2-125 | CHLORINE INTERNAL FILLING GEL FOR A420-FCL, 125 ML |
* Configuration cable for pH sensor, Windows' software is free. Contact our sales for more information. |
Link for full datasheet:
Link for manual:
Daviteq Technologies Inc
|