Sigfox AC Current Sensor WSSFC-AC

SKU: WSSFC-AC

Doc No: WSSFC-AC-DS-EN-10

Introduction

WSSFC-AC is a Sigfox sensor with 1-channel AC current input 5A to measure the AC current load of your motors, machines...to count the energy consumption, OVER-load or NO-load detection, run hour counting...With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery up to 10 years. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7.

Compatible with any 5A Current Transformer on the market ;
Sigfox Ready;
10-year battery;
Plug & Play.

Typical Applications

Monitor any electrical loads;
Monitor load of Motor, Pump, Fan;
Monitoring load of Air-Con, Fridge, Freezer...

Specification

SENSOR SPECIFICATION
Measuring range	0..5A AC
Accuracy	1.0%
Resolution	10 bit
Temperature Drift	< 100 ppm
Electrical connection	cable 0.5m length with wire crimping connectors for SAFETY
SIGFOX SPECIFICATION
Sigfox zones	select RC2-RC3-RC4-RC5 or RC1-RC6-RC7
Antenna	Internal Antenna 2 dbi
Configuration	via offline USB cable (PC software is supplied at free)
Battery	02 x AA Type 1.5VDC, working time up to 10 years (depends on configuration)
RF Module complies to	CE, FCC, ARIB
Working temperature	-40oC..+60oC (using Energizer Lithium Ultimate AA battery)
Dimensions	H106xW73xD42
Net-weight	190 grams
Housing	Aluminum+Polycarbonate, IP67
Mounting	Wall mount bracket

Ordering Code

Item code	Descriptions
WSSFC-AC-9-11	SIGFOX SENSOR 1-CHANNEL AC CURRENT INPUT MAX 5A, CABLE 0.5M LENGTH WITH WIRE CRIMPING CONNECTORS FOR SAFETY, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC2-RC3-RC4-RC5 ZONES
WSSFC-AC-8-11	SIGFOX SENSOR 1-CHANNEL AC CURRENT INPUT MAX 5A, CABLE 0.5M LENGTH WITH WIRE CRIMPING CONNECTORS FOR SAFETY, INTERNAL ANTENNA, TYPE AA BATTERY 1.5VDC, IP67, RC1-RC6-RC7 ZONES