Sigfox-Ready Ex d Approved Gas Sensor WSSFCEX-G

SKU: WSSFCEX-G

Doc No: WSSFCEX-G-DS-EN-10

Introduction

WSSFCEX-G is a Sigfox-ready gas sensor with explosion-proof approval, comes with a selectable gas sensor module to measure different types of gas. With Ultra-low-power design and smart firmware allow the complete Wireless and Sensor package to run on a single battery type D for 5 years or more with 15 minutes update. It can support the following regions RC1, RC2, RC3c, and RC4.

Ex d Approved;
High-performance Electrochemical sensor;
Calibration via downlink;
Sigfox Ready for RC1-RC2-RC3c-RC4;
5 years battery life with 15 minutes updates;
Plug & Play.

Select Gas Modules

Ethylene
Ethylene Oxide
Organic Acids
Alcohols
Carbon Monoxide
Carbon Disulfide
Chlorine, Br2, Bromine
Chlorine Dioxide
Hydrogen
Hydrogen
Hydrogen Peroxide
Hydrogen Sulfide
Hydrogen Bromide
Hydrogen Chloride
Hydrogen Fluoride
Hydrogen Cyanide
Ammonia
Nitric Oxide
Nitrogen Dioxide
Oxygen
Ozone
Phosphine
Silane
Sulfur Dioxide
Volatile Organic Compound

Specification

SENSOR SPECIFICATION
Please contact us to get individual sensor specification sheet.
SIGFOX SPECIFICATION
Sigfox zones	select RC1-RC2-RC3c-RC4
Antenna	External Antenna
Configuration	via Downlink or offline USB cable (PC software is supplied for free)
Battery	01 x D type LiSOCl2 3.6V battery
RF Module complies to	CE, FCC, ARIB
Electronics Working temperature	-40°C..+85°C
Housing	Cast aluminum, powder-coated, IP66
ATEX Certificates	IMQ 14 ATEX 005 X, TÜV CY 18 ATEX 0206158 X and IECEx DEK 15.0048X
Marking	ATEX II 2G Ex db IIC T5/T6 Gb and ATEX II 2D Ex tb IIIC T100/T85°C Db
Directive	ATEX 2014/34/EU
Standards	IEC-EN60079-0 IEC-EN60079-1 IEC-EN60079-31
Applicable zones	Zone 1 - 21 (gas) and Zone 2 - 22 (dust)
Mounting	wall mounting holes
Product dimensions	H100xW100xD80 (excluded antenna)
Net weight	1.5 kgs
Packaging dimension	W160 x D150 x H250 mm
Gross weight	< 1.6 kgs

Ordering Code

Item code	Descriptions
WSSFCEX-G-X-Y	SIGFOX-READY GAS SENSOR, EX D APPROVED ZONES 1-2-21-22, BATTERY 3.6V, IP66, FOR RC1-RC2-RC3c-RC4 ZONES
	-X: GAS NAME -Y: MEASUREMENT RANGE SELECT GAS SENSOR MODULES AS BELOW
-CH2O-10	FORMALDEHYDE, 10 PPM
-CH2O-50	FORMALDEHYDE, 50 PPM
-CH2O-1000	FORMALDEHYDE, 1000 PPM
-C2H4-10	ETHYLENE, 10 PPM
-C2H4-200	ETHYLENE, 200 PPM
-C2H4-1500	ETHYLENE, 1500 PPM
-ETO-10	ETHYLENE OXIDE, 10 PPM
-ETO-100	ETHYLENE OXIDE, 100 PPM
-ETO-1000	ETHYLENE OXIDE, 1000 PPM
	for other sensors, please contact us.

Link for full datasheet:

Link for manual:

Daviteq Technologies Inc