Sigfox OZONE Sensor WSSFC-G4-O3
| SKU: WSSFC-G4-O3 | Doc No: WSSFC-G4-O3-DS-EN-10 |
IntroductionWSSFC-G4-O3 is a Sigfox sensor with a built-in high performance electrochemical gas sensor to measure the concentration of Ozone (O3) in the air. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run on 2 x AA battery 1.5V for 2-5 years with 15 minutes update. It can support the following regions RC1, RC2, & RC4.
|
Typical Applications
|
 |
 |
 |
 |
Specification
| SENSOR SPECIFICATION | |
|
Measurement Range
|
Select: 0 to 5 or 100 ppm of O3
|
|
Detection Limit
|
1 ppb
|
|
Resolution
|
1 ppb
|
|
Repeatability
|
< ± 2 % of reading
|
|
Response Time
|
T(90) < 60 seconds
|
| Expected Sensor Life |
02 years in normal Air
|
|
Expected Long Term Output Drift in air
|
< 2 % signal loss per month |
|
Operating Temperature Range
|
-40 to 50 °C
|
|
Operating Humidity Range
|
non-condensing 15 to 90% recommended continuous 0 to >95% RH - intermittent
|
| SIGFOX SPECIFICATION | |
| Sigfox zones | select RC1-RC2-RC4 |
| Antenna | Internal Antenna 2 dbi |
| Configuration | via Downlink or offline USB cable (PC software is supplied at free) |
| Battery | 02 x AA Type 1.5VDC |
| RF Module complies to | CE, FCC, ARIB |
| Working temperature | -40°C..+60°C (using Energizer Lithium Ultimate AA battery) |
| Dimensions | H140xW73xD42 |
| Net-weight | 250 grams |
| Housing | Polycarbonate, IP67 |
| Mounting | Wall mount bracket |
Ordering Code
| Item code | Descriptions |
|
|
SIGFOX OZONE GAS SENSOR MODULE, 0-5 PPM, 1PPB RESOLUTION, 4-SERIE, BATTERY 1.5V, IP67, FOR RC1-RC2-RC4 ZONES |
Link for full datasheet: https://filerun.daviteq.com/wl/?id=DEM7XrPnDg4eo1P5cp62WwjNow148TWw
Link for manual:
|
Daviteq Technologies Inc
|
No Comments