WIND DIRECTION SENSOR WDR
| SKU: WDR | Doc No: WDR-DS-EN-10 |
IntroductionThe wind direction sensor is used to measure the direction value of the wind and convert it into an electrical signal, which can be directly transmitted to the recording device for processing. The sensor housing is made of polycarbonate environmental protection material, with very small dimensional tolerances and high surface accuracy. The wind direction sensor adopts low inertia wind vane and precision potentiometer, with high sensitivity and high precision.
|
Typical applications
|
 |
 |
Specification
|
Measure range |
0-360 degree |
|
Start wind |
0.5 m/s |
|
Resolution |
0.1 degree |
|
Accuracy |
+/- 1 degree |
|
Maximum turning radius |
200mm |
|
Output |
0..5VDC or RS485 ModbusRTU |
|
Power supply |
12..24VDC |
|
Power consumption |
≤0.3W |
|
Working temperature |
-20~60℃ |
|
Working humidity |
≤100%RH |
|
Cable specifications |
2m 3-wire system (analog signal) |
Ordering Code
| Item code | Descriptions |
|
WDR-01-ANALOG |
WIND DIRECTION SENSOR, 0-360 DEGREE, CARBON FIBER, 0-5VDC OUTPUT, 12-24VDC, WITH CABLE AND CONNECTOR |
|
MBRTU-WDR-01 |
WIND DIRECTION SENSOR, 0-360 DEGREE, CARBON FIBER, MODBUSRTU RS485 OUTPUT, 12-24VDC, IP65 |
Link for full datasheet:
Link for manual:
|
Daviteq Technologies Inc
|
No Comments