GENERAL GUIDE FOR ICONNECTOR STHC
This chapter is to provide the general guides for all kind of iConnector with SKU: STHC. It includes the following guides:
* Principle of operation of iConnector STHC;
* How to Wiring the iConnector
* How to Config iConnector via offline cable;
* How to Configure Modbus commands for iConnector;
* How to Configure Alarms & Event;
* How to Trouble-shoot iConnector;
...
General Information
STHC-MN01-EN-01 JUL-2020 This document is applied for the following products SKU STHC HW...
I. Specification of iConnector STHC
1.1 Introduction STHC is a Smart IoT Gateway, aka iConnector, a main component in any IoT applic...
II. Principle of operation of iConnector STHC
2.1 General operation principles of iConnector 2.1.1 LED meaning 2.1.1.1 LED status Status ...
III. Offline configuration for iConnector
iConnector need to be configured properly so that it is able to connect to Globiots Server succes...
IV. Insert SIM Card for Cellular iConnector
Steps to insert SIM card: Step 1: Remove the housing Using L hex key to unscrew M4 screws at th...
V. Installation iConnector STHC
5.1 Example application iConnector is used widely in many applications for Smart Factory, Smart ...
VI. How to add iConnector STHC to Globiots Server System?
VII. Modbus Configuration for iConnector STHC on Globiots
VIII. Parameter Configuration for iConnector STHC on Globiots
IX. Alarm & Event Configuration for iConnector STHC on Glbiots
X. Configuring special functions of iConnector on Globiots
XI. Troubleshooting iConnector and Globiots
No. Phenomena Reason Solutions 1 Cannot read modbus No power supply, the power cord is in...